Yangmu Square Processing Factory

Description :

　　With the gradual improvement of wood work,Wood processing plantIt is also rising slowly, and many people have set their sights on this shopping mall. Colorful stepped into this job, although the original intention was good, wanting to do a good job in the wood processing factory. However, the mall is constantly changing, and there are always various difficulties, which leads to a chaotic atmosphere in the entire mall, making it difficult for buyers of construction wood to find what kind of manufacturer to look for

　　With the gradual improvement of wood processing operations, wood processing factories have also risen up. Many people have set their sights on this shopping mall and entered this field with great enthusiasm. Although the original intention was good to do a good job in wood processing factories, the mall is constantly changing and there are always various difficulties, resulting in a chaotic atmosphere throughout the mall. As a result, buyers of construction wood do not know what kind of manufacturer to find

　　Poplar wood processing plants are widely used in our daily lives. Due to the special nature of the wood material, it has a very durable service life and a very comfortable touch, which can well meet our needs for application. In this regard, we would like to introduce the advantages and disadvantages of poplar wood and poplar wood boards, so that friends who are interested in poplar can have a better understanding.

　　Introduction to the advantages, disadvantages, and uses of poplar wood and poplar wood boards

　　Introduction to Yangmu

　　Yangmu, also known as "Xiaoye Yang", often has a segmental luster, hence it is also known as "satin Yang". It is often used as an accessory for elm furniture and as the skeleton for lacquer furniture in ancient furniture. It is a commonly used wood in northern China, with detailed and soft quality, stable properties, and low cost and easy availability. A fast-growing and high-yielding tree species, it has the characteristics of wide adaptability, long annual growth time, and fast production speed. It is widely cultivated in both southern and northern China, and has abundant poplar resources. It's not the kind of Soviet poplar, big leaved poplar, Populus euphratica introduced in the mid-20th century. Yangmu often has a "pungent smell" and is lighter and softer than birch. Birch wood has a slight fragrance and often has very fine brownish black water soaked lines. This is the difference between the two. Due to the loose structure and relatively poor material quality of poplar fiber, its application planning is greatly restricted. Currently, it is mainly used as a solid wood composite floor core board, building formwork, bottom plate, short cycle industrial material or road, and river beautification tree species.

　　Introduction to the benefits of poplar wood in Shuyang Xingxing Wood Processing Factory

　　1. Boxwood is tough, has high mechanical strength, and strong corrosion resistance; Moderate hardness and strength, suitable for carving, generally suitable for openwork relief carving.

　　2. There is a significant difference in the heartwood and sapwood of boxwood, with the sapwood being dark yellow and the heartwood being dark purple gray.

　　3. The wood grain of boxwood is well-organized and clear, with a smooth surface and beautiful stripe patterns resembling those of boxwood. Wood can be shaped, carved, polished, and painted to create exquisite carved lacquer crafts.

　　4. Chinese boxwood furniture is mainly in the Ming style, with concise shapes, flowing lines, and elegant and generous styles Ming style furniture is moderately decorated, with a balance of complexity and simplicity, and some decorations are just right.

　　Poplar drying board

　　Introduction to the disadvantages of poplar wood in Shuyang Xingxing Wood Processing Factory:

　　1. There is a distinction between old and new boxwood, and the disadvantages of new boxwood furniture are its tendency to deform, tendency to grow insects, and severe shortening; The disadvantage of old boxwood is that some areas may have old insect holes, old cracks, and old tenon holes.

　　2. In monotonous rooms, boxwood furniture is not easy to crack, but boxwood is not easy to dry. Nowadays, there are many boxwood boards on the market due to cost or equipment problems. The drying of the wood is not in place, so the boxwood furniture produced is prone to cracking and deformation.

　　Dried and planed poplar wood

　　Introduction to the use of poplar wood in Shuyang Xingxing Wood Processing Factory:

　　Poplar wood has the advantages of light weight, high strength, good elasticity, long and high fiber content, and easy processing. Therefore, poplar wood has a wide range of uses, and many countries in the world have listed poplar wood as an important industrial material.

　　1. Plywood processing: Use large and medium diameter materials with a small head diameter of 18 centimeters or more, with a length of 2.6 meters per piece. Spin cut veneer, monotonic hot pressing, processed into plywood.

　　2. Particle board and fiberboard processing: Using poplar tips, branches, and factory scraps as materials, crushing and processing them into particle board and fiberboard.

　　3. Paper pulp processing: using small-diameter wood and branch wood, can be mixed with coniferous wood.

　　4. Civil building material processing: can be used for beam and wood structures, sandalwood strips, rafters, ceilings, partitions, etc.

　　5. Packaging material processing: Poplar wood has a straight texture, shrinkage and expansion, and has medium to high impact toughness. It has good shock absorption performance, no odor, and is easy to nail. Although the nail holding force is small, it is not easy to crack. It is suitable for processing packaging boxes for food, tea, medicine, precision instruments, and other industries.

　　6. Processing of matchstick wood: Poplar wood has low density and softness, straight texture, fine and uniform structure, light color, easy wax immersion, and is the ideal material for making matchstick stems.

　　7. Processing of particleboard: Using logs or branches with a diameter of 6 centimeters or more, sawing them into blocks, making the sandwich of particleboard, and supplying materials for the processing of particleboard.

　　8. Processing of other materials: can be used as wooden lifting heads, wooden lifting handles, threshing buckets, toothpicks, ice cream sticks, etc.

　　Others, the leaves of poplar trees can be used for processing feed and cultivating shiitake mushrooms; Bark can be used as a feed additive, medicinal or used to make activated carbon, cork stoppers, soundproofing boards, life jackets, shock-absorbing pads, etc; Flowers can be used as feed or medicine; Sawdust can cultivate mushrooms; The root can be used as the sandwich Flat noodles of packaging board and blockboard, so it can be said that the whole body of poplar is treasure, so the prospect of vigorously developing poplar industry is bright.

　　The above is an introduction to the advantages, disadvantages, and uses of poplar wood by Shuyang Xingxing Wood Processing Factory. If you already have an understanding of poplar wood, you can choose according to its practical needs based on its advantages and disadvantages,

AfterSalesService :

• Yangmu Processing Factory