Wood mold inhibitor manufacturer direct sales

Description :

　　Product Overview:

　　The Yazhilin produced by our companyWood mold removerThe product is a new generation of highly active anti mold and anti mold concentrate. The main ingredients of the product are mold differentiation factor, sterilization and antibacterial agent, dispersant and impregnating agent. It can remove various bacteria, molds, cyanosis, and mold caused by algae and fungi. It is a useful, convenient, and practical new anti mold product on the market now.

　　The principle of mold removal in the product is that the mold differentiation factor passes through an aqueous carrier, adsorbs and captures the mold, punctures the mold cell membrane, fully penetrates into its interior to kill the mold, and differentiates the mold to make it fall off and disappear. Regarding the deepening of stubborn mold spots within the product, the use of fungicide can also achieve differentiation and inhibit its regeneration. Various bacteria can form moldy products, and the use of antifungal agents can quickly differentiate the mold together, largely restoring the nature of the product raw materials without leaving mold marks. This product is an environmentally friendly export product with simple operation. It can be diluted with tap water and soaked in moldy products.

　　Product Features:

　　1. It can effectively eliminate the discoloration of secretions caused by the proliferation of wood molds such as Trichoderma, Penicillium, Aspergillus niger, Botrytis cinerea, Penicillium, and Polyporus due to moisture during the moldy and rainy season;

　　2. Can effectively eliminate the discoloration of wood caused by microbial proliferation and reproduction;

　　3. Can effectively eliminate chemical discoloration of wood caused by contact with metal ions such as acid-base enzymes;

　　4. Can effectively eliminate physical discoloration of wood caused by heat or ultraviolet radiation;

　　5. Can effectively eliminate physiological discoloration of wood caused by resin exudation and insect diseases;

　　6. It can effectively eliminate adverse phenomena such as discoloration caused by poor drying of wood.

　　Scope of application:

　　Mainly used for removing mold from the surface of materials such as walls, bamboo and wood, decorative panels, furniture, wallpaper, leather, synthetic fibers, plastics, rubber, etc

　　Application method: Spraying and soaking (for severe mold growth in large areas) can be used as treatment methods

　　A、 For products with slight mold, mildew spots, and mold spots on the surface, mix the ingredients in a 1:1 ratio and brush or soak with a brush. After about 30 minutes, the mold spots will disappear (tap water is sufficient).

　　B、 For products with severe mold growth, surface decay, or mold infiltration into the interior, it is recommended to use the original solution for painting or soaking (1-2 times with the original solution)

　　First and foremost:

　　1. This product has an oxidizing effect on metals and clothing, so attention should be paid to protection when using it.

　　2. To ensure effectiveness, please ensure that this product is evenly distributed before use.

　　Shelf life: at room temperature, moisture-proof, sealed, and away from light. Shelf life is 24 months.

　　Packaging standards: IBC ton drum, 25kg/50kg PE drum.

　　Wood preservatives

AfterSalesService :

• Wood mold inhibitor manufacturer direct sales