Asahi Kasei PA66 1300S High Flow Universal Injection Nylon Raw Material

Description :

This PA66 1300S is a general-purpose polyamide 66 resin produced by Asahi Kasei in Japan. It belongs to the standard viscosity grade and has good fluidity and processing performance. During the injection molding process, the melt flows smoothly and can quickly fill the mold cavity, shortening the molding cycle. For plastic products with complex structures or thin wall thickness, this material can reduce glue shortage and flash phenomenon, and improve production efficiency. Suitable for large-scale automated production, helping factories reduce unit costs and maintain a stable output rhythm.

This material has typical PA66 mechanical properties, high strength, good rigidity, and wear resistance. In a dry state, it exhibits excellent tensile strength and bending modulus, and can withstand certain mechanical loads. After humidity control treatment, the toughness will be further improved and the impact resistance will be enhanced, making it suitable for structural components that require a certain degree of tolerance. Whether it is gears, bearings, or housing components, reliable physical support can be provided. In long-term use, it has good dimensional stability and is not prone to significant deformation, ensuring assembly accuracy.

Heat resistance is another major characteristic of this nylon material. It has a higher melting point and a higher heat deformation temperature than ordinary plastics, and can maintain stable performance in higher temperature environments. Short term ability to withstand higher operating temperatures, suitable for applications such as automotive engine peripheral components, electronic and electrical heating element casings, etc. Under high temperature conditions, materials are not easily softened or creep, maintaining structural integrity. At the same time, it has a good flame retardant foundation and can achieve higher fire resistance levels after partial modification, meeting the safety requirements of the electronic and electrical industry.

When purchasing PA66 1300S, please pay attention to the packaging and storage of raw materials. Usually packaged in 25kg moisture-proof paper bags with polyethylene lining to ensure that moisture does not enter during transportation. If it is not used up all at once after opening the box, it must be sealed and stored in a cool and dry place. It is recommended to perform dehumidification and drying treatment before use, usually at 80-100 ℃ for 4-6 hours, to remove absorbed moisture and avoid silver lines or bubbles during injection molding, which may affect the surface quality and mechanical properties of the product. Dongguan Haoyang Plastic Co., Ltd. provides stable supply of goods.

AfterSalesService :