Ceramic squat toilet, odor proof and water-saving bathroom sewage sanitary ware

Description :

  Squatting toilet is a type of sanitary ceramic ware installed on the floor of the bathroom for the collection and discharge of human excrement. It uses gravity or siphon principle to flush sewage into the sewer, effectively solving the sewage needs of public places and household bathrooms. This product is usually used in conjunction with water tanks or delay valves, and is suitable for high-frequency use scenarios such as schools, hospitals, stations, factory dormitories, as well as home bathrooms that emphasize hygiene isolation. It has the characteristics of simple structure, easy cleaning, and not easily clogged.

  This squat toilet is made of high-temperature microcrystalline self-cleaning glazed ceramic material, which is fired at a high temperature of over 1200 ℃. The body is dense, with a water absorption rate of less than 0.5%, and has good crack resistance and corrosion resistance. The product complies with the national standard GB/T 6952-2015 "Sanitary Ceramics", with a smooth and delicate surface that is not easily stained. The common specifications range from 500mm to 700mm in length, approximately 400mm to 450mm in width, and 200mm to 250mm in height. The diameter of the sewage outlet is usually 100mm, which meets the standard building drainage pipe interface size to ensure installation compatibility.

  When selecting, it is necessary to distinguish between structures with and without a water trap. The squat toilet with a water trap comes with a water seal, which can effectively block sewer odors and pests, making it suitable for scenarios where it is directly connected to a straight pipe; If there is no water storage bend, it needs to be used in conjunction with the underground embedded S-bend or P-bend, which is suitable for fine decoration projects that have already completed waterproofing and water storage structures. In addition, attention should be paid to pit distance measurement to confirm the distance from the center of the sewage outlet to the wall, commonly 300mm or 400mm, to avoid installation failure due to size discrepancies. Compared to sitting toilets, squatting toilets are more hygienic, avoiding direct skin contact and suitable for public areas.

  Before installation, it is necessary to check whether the sewage pipeline is unobstructed, and apply an appropriate amount of glass glue or cement mortar around the sewage outlet for sealing to prevent leakage and odor overflow. In daily use, it is recommended to regularly use neutral cleaning agents to clean the glaze surface, avoid using strong acids and alkalis to corrode the glaze layer, and maintain the flexibility of the flushing button or valve. If weak flushing is found, the water level in the tank or the filter screen of the inlet valve should be checked for blockage; If there is a reverse odor, it is necessary to check whether the water seal height is sufficient or whether there are foreign objects blocking the water trap, and clean it in a timely manner to maintain a good user experience.

AfterSalesService :