Fully automatic towel, bath towel, floor towel dryer, industrial large-scale drum drying equipment, energy-saving and efficient

Description :

  Towel, bath towel, and floor towel dryer is an industrial grade drying equipment designed specifically for hotels, hospitals, schools, and large laundry rooms. It mainly solves the problems of high moisture content of washed fabrics, low natural drying efficiency, and secondary pollution. This device uses a high-temperature hot air circulation system to quickly remove moisture from cotton fabrics, ensuring that towels, bath towels, and floor towels meet drying standards in a short period of time, significantly improving logistics turnover efficiency. Typical operating conditions are suitable for large-scale commercial washing scenarios with a daily washing capacity of over 500 kilograms. It can operate continuously and stably to meet high-intensity work requirements and is an indispensable core finishing equipment for modern washing centers.

  This dryer usually uses high-quality stainless steel or galvanized sheet to manufacture the inner and outer shells, which have corrosion resistance and high temperature resistance characteristics, ensuring the stability of the equipment for long-term use in humid environments. The core specifications include drum diameter, heating method (steam, electric heating, or gas), and installed power, with common capacity ranging from 50kg to 150kg. The equipment is equipped with an intelligent temperature control system and timing device, supporting precise temperature adjustment to prevent fabric damage due to overheating. The execution standards comply with the JB/T series national standards for washing machinery, and some high-end models have passed CE certification. The design of the air inlet and outlet is reasonable, combined with efficient filters to reduce the accumulation of debris, ensure smooth hot air circulation, and improve heat exchange efficiency.

  When selecting, the drum capacity should be determined based on the daily washing volume and peak workload. It is recommended to reserve 20% -30% redundancy to cope with peak hours. If there is a stable steam source on site, steam heating type is preferred for lower operating costs; If there is no steam condition, electric heating or gas type can be used, but the power load or gas connection conditions need to be evaluated. For mixed washing scenarios of heavy and light towels, attention should be paid to the adjustability of the fan speed to avoid entanglement of lightweight fabrics or drying of heavy fabrics. Compared with ordinary household dryers, industrial towel and floor towel dryers have a larger single processing capacity and stronger durability. It is strictly prohibited to put non-woven items or flammable chemicals into the dryer for drying.

  During installation, it is necessary to ensure that the bottom of the equipment is level and connect an independent exhaust duct to the outside. The length of the exhaust duct should not be too long and the number of bends should be minimized to ensure the dehumidification effect. The focus of daily maintenance is to regularly clean the air inlet filter and the debris collector at the bottom of the drum to prevent blockage and overheating faults. It is recommended to check the sealing of the door seal after each shift and replace it promptly if any wear is found to prevent heat leakage and increase energy consumption. Common faults such as slow heating are often caused by insufficient steam pressure or damage to the electric heating tube, and abnormal noise should be checked for bearing lubrication. Standardized operation and regular maintenance can extend the service life of towel and floor towel dryers and maintain optimal drying performance.

AfterSalesService :