Smart Home, LX10-22S Travel Switch for Urban Communities JOSEF

Description :

model

　　LX10-12B AC380V 10A single arm double contact

　　LX10-12

　　LX10-32

　　LX10-32 with heavy hammer

　　LX10-12 380V 10A

　　LX10-11J

　　LX10-12J

　　LX10-31 with heavy hammer

　　LX10-11S 2 normally closed point

　　LX10-12 AC380V 5A

　　LX10-12S explosion-proof type

　　LX10-22S

　　LX10-12S

　　LX101-3A

　　LX10-31 with heavy hammer

　　LX10-32 AC380V DC220V 20A

　　LX10-32

Purpose and Scope of Application

　　The LX10 series travel switch (hereinafter referred to as the travel switch) is used for AC 50Hz, 380V. In the control circuit of a crane with a DC 220V, it is used for endpoint protection of the mechanism stroke, and its long-term working current is 10A. The stroke switch is designed, manufactured, and inspected according to GB14048.5.

　　The travel switch ensures reliable operation under the following conditions:

　　a) The altitude shall not exceed 2000m.

　　b) The temperature of the surrounding medium shall not exceed+40 ℃ and shall not be lower than -50 ℃, and the daily average temperature shall not exceed+35 ℃.

　　c) The relative humidity of the air at the installation location shall not exceed 50% at a temperature of+40 ℃; Higher relative humidity is allowed at lower temperatures, with the average monthly temperature of the wettest month not exceeding+25 ℃ and the average relative humidity of that month not exceeding 90%. Measures must be taken to prevent condensation on the product due to temperature changes.

　　The travel switch is not suitable for operation under the following conditions:

　　a) In environments containing corrosive metals and insulating gases, vapors, or dust;

　　b) In an environment containing conductive dust;

　　c) In places with severe vibrations and jolts.

classification

　　The travel switch is divided into six types according to the type of operating arm:

　　a) The LX10-1 travel switch adopts a single roller ruler lever operating arm, which is used for translation mechanisms with relatively small inertia travel.

　　b) LX10-2 □ type travel switch with double roller fork lever operating arm, used for translation mechanisms with large inertia travel.

　　c) The LX10-3 □ type travel switch is equipped with a heavy hammer type load lever operating arm, which is used to limit the travel of the lifting mechanism.

　　d) The LX10-4 □ type travel switch is equipped with a three pronged operating arm, which is used as a translation mechanism for three operating positions.

　　e) The LX10-5 □ type travel switch is equipped with a roller hammer type operating arm, used for translation mechanisms with low speeds.

　　f) The LX10-6 □ type travel switch housing has roller operated arms on both sides for high-speed translation mechanisms.

Ordering Instructions

　　Please specify when placing an order:

　　a) Complete product model;

　　b) Quantity.

• limit switch