LX10-12 AC380V 5A travel switch JOSEF is used for metallurgical steel rolling and chemical steel

Description :

model

　　LX10-12B AC380V 10A single arm double contact

　　LX10-12

　　LX10-32

　　LX10-32 with heavy hammer

　　LX10-12 380V 10A

　　LX10-11J

　　LX10-12J

　　LX10-31 with heavy hammer

　　LX10-11S 2 normally closed point

　　LX10-12 AC380V 5A

　　LX10-12S explosion-proof type

　　LX10-22S

　　LX10-12S

　　LX101-3A

　　LX10-31 with heavy hammer

　　LX10-32 AC380V DC220V 20A

　　LX10-32

Product Parameters

　　The LX10 series travel switch is suitable for control circuits with AC 50Hz, 380V, DC 220V and below. It is mainly used as an end switch for the travel limit of the rising mechanism or as a travel switch and program control switch for the automatic circulation mechanism.

Product advantages

　　Compliant with IEC337-1 and GB14048. 5-93 standard

Purpose and Scope of Application

　　The LX10 series travel switch (hereinafter referred to as the travel switch) is used for AC 50Hz, 380V. In the control circuit of a crane with a DC 220V, it is used for endpoint protection of the mechanism stroke, and its long-term working current is 10A. The stroke switch is designed, manufactured, and inspected according to GB14048.5.

　　The travel switch ensures reliable operation under the following conditions:

　　a) The altitude shall not exceed 2000m.

　　b) The temperature of the surrounding medium shall not exceed+40 ℃ and shall not be lower than -50 ℃, and the daily average temperature shall not exceed+35 ℃.

　　c) The relative humidity of the air at the installation location shall not exceed 50% at a temperature of+40 ℃; Higher relative humidity is allowed at lower temperatures, with the average monthly temperature of the wettest month not exceeding+25 ℃ and the average relative humidity of that month not exceeding 90%. Measures must be taken to prevent condensation on the product due to temperature changes.

• limit switch