LX33-32 travel switch JOSEF for new energy, energy mines

Description :

　　model

　　LX33-12

　　LX33-32 with heavy hammer and steel wire rope

　　LX33-22

　　LX33-12 AC500V 20A

　　LX33-32 AC500V 20A

　　LX33-31

　　LX33-11

　　LX33-31 with heavy hammer

　　LX33-42

　　LX33-32

　　LX33-4

　　Product Parameters

　　The LX33 series travel switch is suitable for AC 50-60Hz; AC380V; DC220V； In a control circuit with a current of 20A, it is used to limit the travel of cranes and various equipment.

　　Product advantages

　　This product complies with the GB14048.5-2001 standard.

　　Scope of Application

　　LX33 travel switch is suitable for AC 50-60HZ; AC380V; DC220V; In the control circuit with a current of 10A, it serves as a travel limit and terminal protection for the crane's translation mechanism. Normal operation at ambient temperatures ranging from -5 ℃ to+40 ℃; Environmental temperature 90%; Mechanical lifespan of 1 million cycles, protection level IP44; Compliant with IEC337-1 GB14048.5-2001 standard.

　　working conditions

　　1. Surrounding air temperature: The surrounding air temperature should not exceed+40 ℃ and should not be lower than -5 ℃ And the average value over 24 hours shall not exceed+35 ℃.

　　2. Altitude: The altitude of the installation site shall not exceed 2000m.

　　3 Atmospheric conditions: When the temperature is+40 ℃, the relative humidity of the air does not exceed 50%. At lower temperatures, there can be higher relative humidity, such as up to 90% at 20 ℃. Special measures should be taken for occasional condensation caused by temperature changes.

　　4 places with no significant shaking or impact vibration.

　　In a medium without explosive hazards, and without gases and dust (including conductive dust) that can corrode metals and damage insulation.

　　In a place without rain or snow invasion.

• limit switch