X2-N travel switch JOSEF is stable, safe, and has good anti-interference performance

Description :

　　Scope of Application

　　The X2 series travel switch is suitable for circuits with AC 50Hz, voltage up to 380V and below, and rated working current of 2A. It is used to control the travel limit of moving machinery, change the direction or speed of the machinery's movement.

　　Normal working conditions and installation conditions

　　1. The ambient air temperature does not exceed+40 ℃, with a lower limit of -5 ℃, and the 24-hour average temperature does not exceed+35 ℃;

　　2. The altitude of the installation site shall not exceed 2000m;

　　3. The relative humidity of the atmosphere does not exceed 50% when the ambient air temperature is+40 ℃, and there can be higher relative humidity at lower temperatures,

　　For example, the relative humidity can reach 90% at+20 ℃, and the elimination of condensation on the product surface due to temperature changes should be considered;

　　4. The pollution level of the switch is level 3;

　　5. In a place without significant shaking and impact vibration, in a medium without explosive hazards, and without gas and dust that can corrode metals and damage insulation in the medium;

　　6. The installation category of the switch is II.

　　model

　　X2-N two open and two closed

　　X2-N

　　X2-N AC380V 2A

• limit switch