JOSEF LX36-84 travel switch has good stability and anti-interference

JOSEF LX36-84 travel switch has good stability and anti-interference

Category:

Electrical Engineering/switch/Limit switch

Model:

LX36-84

Brand:

Shanghai Joseph

model:

LX36-84

Startup method:

push-button switch

rated voltage:

380V

rated current:

twenty

manufacturer:

Shanghai Joseph

Retail Price

500.00RMB


重量

kg

  • Product Description
  • model

    LX36-84

    Startup method

    push-button switch

    rated voltage

    380V

    rated current

    twenty

    manufacturer

    Shanghai Joseph

    Description :

      Product Parameters

      Communication 50-60Hz; AC380V; DC220V; Current 20A

      Product advantages

      This product complies with the GB14048.5-2001 standard.

      Product Overview

      The LX36 series travel switch is suitable for AC 50-60Hz; AC380V; DC220V; Used to limit the travel of cranes and various equipment in a control circuit with a current of 20A

      Scope of Application

      The LX36 limit switch for cranes is mainly used in control circuits with AC 50-60HZ, rated voltage of 380 volts, and DC rated working voltage of 220 volts to limit the working angle of the crane's rotating motion mechanism and perform sequential control. For example, the limit of the upper and lower limit positions of the lifting mechanism of the bridge crane, the limit of the upper and lower limit positions of the lifting mechanism of the port gantry crane, the limit of the upper and lower limit positions of the pitch mechanism, the limit of the upper and lower limit positions of the pitch mechanism, the multi-point position limit or signal output of the trolley running mechanism, the opening and closing of the grab bucket, the limit of the trolley position, and the determination of the trolley position signal are used for various purposes.

      The heaviest feature of this limit switch is

      1. Adjust the capacity of the switch action angle

      2. After adjusting the switch action angle, it will not change due to mechanical vibration.

      3. When adjusting a pair of contact cams, other cams will not change accordingly

      4. Excellent quality, reliable performance, and compliance with national and international standards.

      working conditions

      1. Surrounding air temperature: The surrounding air temperature should not exceed+40 ℃ and should not be lower than -5 ℃ And the average value over 24 hours shall not exceed+35 ℃.

      2. Altitude: The altitude of the installation site shall not exceed 2000m.

      3 Atmospheric conditions: When the temperature is+40 ℃, the relative humidity of the air does not exceed 50%. At lower temperatures, there can be higher relative humidity, such as up to 90% at 20 ℃. Due to occasional temperature changes

      Special measures should be taken for the condensation of raw materials.

      4 places with no significant shaking or impact vibration.

      In a medium without explosive hazards, and without gases and dust (including conductive dust) that can corrode metals and damage insulation.

      In a place without rain or snow invasion.

      The pollution level of the 7-trip switch is level 3.

      The installation category of the 8-stroke switch is Class II.

      LX36-84 Voltage: 380V Current: 10A

      LX36-82

      LX36-88IP54 8A

      LX36-88

      LX36-8110:01

    Key words:
    • limit switch