Static intermediate relay JZ-7Y-317C XJZY-317C JOSEF with good conductivity

Description :

　　The static intermediate relay JZ-7Y-317C (XJZY-317C) is a control relay designed with a static circuit, which has the characteristics of fast response, high reliability, and long life. These types of relays are commonly used in power systems, industrial automation control, and other applications that require electrical isolation and signal conversion.

　　The main advantage of JZ-7Y-317C static intermediate relay lies in its static circuit design, which eliminates mechanical contacts during the relay's operation, thereby avoiding mechanical wear and arc generation. Therefore, it has a higher movement speed and a longer service life. At the same time, static design also reduces the energy consumption and noise of relays during operation.

　　In addition, JZ-7Y-317C relays typically have multiple sets of contacts to meet different control requirements. The contact capacity and voltage level also vary depending on the specific model and application scenario, and users should match them according to their actual needs when choosing.

　　When installing and using JZ-7Y-317C static intermediate relay, the following points should be noted:

　　Ensure that the input voltage of the relay is consistent with the nominal value to avoid damage to the relay caused by high or low voltage.

　　Relays should be installed in a dry, ventilated, and non corrosive gas environment to ensure their normal operation and extend their service life.

　　When wiring, relevant electrical safety regulations should be followed to ensure correct and secure wiring, and to avoid problems such as poor contact or short circuits.

　　Intermediate relay JZ-7Y-204A DC220V

　　Intermediate relay JZ-7Y-206A DC220V

　　Static intermediate relay JZ-7Y-3E/F0 DC220V cabinet bottom fixed installation modular structure

　　Intermediate relay JZ-7Y-220 (XJZY-220) DC220V cabinet bottom plate fixed installation

　　Intermediate relay JZ-7Y-209A (DZY-209) working voltage DC220V board rear terminal wiring

　　Intermediate relay JZ-7Y-220 voltage: DC110V with board front terminal block

　　Intermediate relay JZ-7Y-202 DC220V board rear wiring

　　Intermediate relay JZ-7Y-204 DC110V board front wiring

　　Adjustable current drop type tripping and closing monitoring relay JZ-7Y-204XMS DC110V board front wiring

　　Jumping and closing position monitoring relay JZ-7Y-204XMT cabinet installation board front wiring

　　Intermediate relay JZ-7Y-203 rated voltage 110VDC

　　Jumping position monitoring relay JZ-7Y-35XMC coil voltage 220VDC with base

　　Intermediate relay JZ-7Y-31 DC220V

　　Intermediate relay JZ-7Y-3E/44 voltage DC220V

　　Intermediate relay JZ-7Y-204XMT DC220V two normally open two normally closed embedded rear wiring

　　Intermediate relay JZ-7Y-205 DC220V two normally open four normally closed embedded rear wiring

　　Intermediate relay JZ-7Y-204B DC220V board front wiring

　　Intermediate relay JZ-7Y-203 DC110V embedded installation, wiring behind the board

　　Jumping and closing monitoring relay JZ-7Y-203XMT DC110V

　　Intermediate relay JZ-7Y-202 DC110V CJ-1 board front wiring A11Q

　　Intermediate relay JZ-7Y-210 DC220V board rear wiring

　　Intermediate relay JZ-7Y-210 (XJZY-210) 110VDC

　　Intermediate relay JZ-7Y-220 (XJZY-220) 110VDC

　　Intermediate relay JZ-7Y-17 DC220V cabinet front fixed installation

　　Intermediate relay JZ-7Y-211A DC110V

　　Jumping and closing monitoring relay JZ-7Y/002XMT DC220V

　　Jumping and closing monitoring relay JZ-7Y-S220XMC

　　Intermediate relay JZ-7Y-313 DC220V board front wiring 6 open 2 closed

　　Intermediate relay JZ-7Y-31G 220VDC three normal open three conversion

　　Intermediate relay JZ-7Y-620 DC220V

　　Jumping and closing monitoring relay JZ-7Y-37XMS DC110V, pre board wiring

　　Static intermediate relay JZ-7Y-317C (XJZY-317C)

　　Intermediate relay JZ-7Y-209 with base

　　Intermediate relay JZ-7Y-220K DC110V

　　Intermediate relay JZ-7Y-207A 220V DC 5A

　　Intermediate relay JZ-7Y-15 DC220V

• intermediate relay