JOSEF limit switch LX918-120 500V 5A intelligent computing speed fast

Description :

　　Product Parameters

　　AC 50-60HZ, voltage up to 500V and DC voltage up to 440V

　　Product advantages

　　The shell is made of cast iron, which has good mechanical strength and corrosion resistance

　　Product Overview

　　The LX918 series limit switch is used in circuits with AC 50-60HZ, voltage up to 500V, and DC voltage up to 440V to limit the travel of various machinery. It can also be directly used as a limit switch for 5.5KW three-phase squirrel cage asynchronous motors (main source of two-phase fire)

　　Structure and working principle

　　The shell of the limit switch is made of cast iron, which has good mechanical strength and corrosion resistance. Under the environmental conditions of marine vessels, the material's performance will not deteriorate. The shell form is protective, with a protection level of up to IP67. Due to the spring action, it can automatically reset. The operating position: 5 degrees → 0 → 45 degrees. The contact opening and closing of the limit switch are determined by the cam position.

　　The agreed heating current of the limit switch is 16A, the rated insulation voltage is 500V, and the rated working voltage (UC) and rated working current (LE) correspond to the figure on the right:

　　The rated working voltage of the 5.5KW squirrel cage asynchronous motor controlled by DC is below 440V, and the rated working current is 12A.

　　LX918-11L

　　LX918-11G

　　LX918-120 contact form: one open and one closed, rated voltage: 500V

　　LX918-120 Contact form: Two normally closed, rated voltage: 500V

　　LX918-120

　　LX918-120 500V 5A

　　Application scenarios

• limit switch