High reliability limit switch for aerospace JOSEF LX36-81 10:01

Description :

　　Product Parameters

　　Communication 50-60Hz; AC380V; DC220V； Current 20A

　　Product advantages

　　This product complies with the GB14048.5-2001 standard.

　　Product Overview

　　The LX36 series travel switch is suitable for AC 50-60Hz; AC380V; DC220V； Used to limit the travel of cranes and various equipment in a control circuit with a current of 20A

　　Scope of Application

　　The LX36 limit switch for cranes is mainly used in control circuits with AC 50-60HZ, rated voltage of 380 volts, and DC rated working voltage of 220 volts to limit the working angle of the crane's rotating motion mechanism and perform sequential control. For example, the limit of the upper and lower limit positions of the lifting mechanism of the bridge crane, the limit of the upper and lower limit positions of the lifting mechanism of the port gantry crane, the limit of the upper and lower limit positions of the pitch mechanism, the limit of the upper and lower limit positions of the pitch mechanism, the multi-point position limit or signal output of the trolley running mechanism, the opening and closing of the grab bucket, the limit of the trolley position, and the determination of the trolley position signal are used for various purposes.

　　Model and meaning

　　The heaviest feature of this limit switch is

　　1. Adjust the capacity of the switch action angle

　　2. After adjusting the switch action angle, it will not change due to mechanical vibration.

　　3. When adjusting a pair of contact cams, other cams will not change accordingly

　　4. Excellent quality, reliable performance, and compliance with national and international standards.

　　Basic Parameters

　　Product Features

　　working conditions

　　1. Surrounding air temperature: The surrounding air temperature should not exceed+40 ℃ and should not be lower than -5 ℃ And the average value over 24 hours shall not exceed+35 ℃.

　　2. Altitude: The altitude of the installation site shall not exceed 2000m.

　　3 Atmospheric conditions: When the temperature is+40 ℃, the relative humidity of the air does not exceed 50%. At lower temperatures, there can be higher relative humidity, such as up to 90% at 20 ℃. Due to occasional temperature changes

　　Special measures should be taken for the condensation of raw materials.

　　4 places with no significant shaking or impact vibration.

　　In a medium without explosive hazards, and without gases and dust (including conductive dust) that can corrode metals and damage insulation.

　　In a place without rain or snow invasion.

　　The pollution level of the 7-trip switch is level 3.

　　The installation category of the 8-stroke switch is Class II.

• limit switch