JOSEF LX3-11H 10T travel switch has high reliability and small error

Description :

　　model

　　LX3-11K 500V 6A

　　LX3-11K

　　LX3-11H 5A with heavy hammer

　　LX3-11H 10T

　　LX3-11H 5T

　　LX3-11K BA-500V

　　LX3-11H steel wire rope with heavy hammer, length 35cm

　　LX3-11H IP45

　　Product advantages

　　AC 50Hz, voltage up to 380V, DC voltage up to 220V

　　Product Overview

　　The LX3 series travel switch is suitable for control circuits with AC 50Hz, voltage up to 380V, and DC voltage up to 220V. It is used to control the travel or change the direction or speed of motion of motion mechanisms with a speed of not less than 0.1 meters per minute.

　　1、 Model meaning

　　2、 Purpose:

　　The LX3 series travel switch is suitable for control circuits with AC 50Hz, voltage up to 380V, and DC voltage up to 200V. It is used to control the travel or change the direction or speed of motion of motion mechanisms with a speed of not less than 0.1 meters per minute. This travel switch is designed, manufactured, and inspected in accordance with GB14048.5 standard.

　　3、 Structure Overview

　　The structure of the LX3 series travel switch is divided into two types: direct acting, opening, and protective.

　　4、 Usage conditions

　　The travel switch should work normally under the following conditions:

　　1. Altitude not exceeding 2000 meters;

　　2. The temperature range of the surrounding air is not higher than+40 ℃ and not lower than -5 ℃, and the average value within 24 hours is not greater than+35 ℃.

　　3. Relative humidity of the air: The average relative humidity of the wettest month is 90%, and the average temperature of that month is 25 ℃, taking into account the condensation that occurs on the surface of the product due to temperature changes;

　　4. Places without significant shaking and impact vibration;

　　5. In a medium without explosive hazards and without gas or dust that can corrode or damage insulation;

　　6. In places without rain or snow invasion;

　　7. Any installation angle.

　　5、 Main technical data

• limit switch