JOSEF travel switch LXP1-404-1DA AC230V 60HZ

Description :

　　model

　　LXP1-404-1DA AC230V 60HZ

　　LXP1-100/2CA

　　LXP1-404/1UA

　　LXP1 404－1G

　　LXP1-120/1RA

　　LXP1（3SE3）-404/1GA

　　Product Parameters

　　Rated voltage: 220 (V) Rated current: 30 (A)

　　Product advantages

　　The LXP1 series travel switches are divided into two categories: open type and protective type.

　　Product Overview

　　This series of travel switches is suitable for control circuits with AC 40~60Hz, AC voltage up to 500V, DC voltage up to 600V, and current up to 10A. It converts mechanical signals into electrical signals and is used to control the travel and speed of moving machinery or for program control.

　　Structural Overview

　　The LXP1 series travel switches are divided into two categories: open type and protective type. The opening type is divided into two types: two pole and three pole. The two pole opening type has four types of contact bridge: instantaneous, creeping, creeping single bridge, and creeping cross type. The three pole opening type only has creeping type. The protective type is divided into three types: two pole, three pole, and four pole. The contacts are divided into one normally open and one normally closed, one normally open and two normally closed, two normally open and one normally closed, and two normally open and two normally closed. Please refer to the "Composition of Switch Contacts" for specific information.

　　purpose

　　This series of travel switches is suitable for control circuits with AC 40~60Hz, AC voltage up to 500V, DC voltage up to 600V, and current up to 10A. It converts mechanical signals into electrical signals and is used to control the travel and speed of moving machinery or for program control.

• limit switch