Used for new energy JOSEF Joseph trip relay GRUS-11T-9H4D/125VDC

Description :

　　GRUS-11T series LOCKOUT interlock tripping relay

　　GRUS-11T-9H4D/220VDC

　　GRUS-11T-10H3D/220VDC

　　GRUS-11T-9H4D/125VDC

　　GRUS-11T-10H3D/125VDC

　　GRUS-11T-9H4D/110VDC

　　GRUS-11T-10H3D/110VDC

　　GRUS-11T-5H2D\DC220V

　　GRUS-11T-3H3D-6H1D\220V

　　GRUS-11T-3H3D-6H1D\110V

　　Application scenarios and characteristics

　　LOCKOUT relay, also known as lockout trip relay

　　This relay is suitable for use in conjunction with generator transformer protection or transformer protection, with up to 13 pairs of contacts for fast tripping outlets, signaling, and other functions

　　Used for situations where the auxiliary contacts of a single device cannot meet the required quantity and need to be expanded, it can be reset remotely or locally

　　PHOENIX MSTB series terminals are selected for wiring terminals

　　Installation dimensions: EMG-GCP: 146mm (L) × 72.5mm (W) × 115.5mm (H)

　　Installation method: Embedded installation

　　Terminal block: can be disassembled and assembled with a Yiyu screwdriver

　　Product Series

　　GRUS=Embedded Operation Relay Function Definition

　　11T=plastic EMG/GCP structure, a pair of normally closed contact relay output contact types

　　9H4D=Nine normally open and four normally closed contacts

　　10H3D=rated working voltage of relay coils with ten normally open contacts and three normally closed contacts

　　220VDC=220V rated DC voltage; 125VDC=125V rated DC voltage; 110VDC=110V rated DC voltage

　　Input circuit - coil voltage rated DC voltage 110VDC; 125VDC; 220vDc

　　Allow long-term working voltage of 1.2Un

　　Reliable action pulse width ≥ 50mS

　　Starting voltage range 50% to 80%

　　Output circuit - relay contact output

　　Number of contacts: Thirteen pairs of contacts

　　Output contact type 9H4D; 10H3D

　　Contact point for long-term connection of load current 8A@250VAC /30vDc

　　Action time (rated voltage) ≤ 7mS (normally open contact closing time)

　　Return time (normally open contact return) ≤ 15mS (normally open contact return)

　　Insulation resistance ≥ 100MQ

　　Dielectric strength 2000VAc, 50Hz, 1min, 5mA between coil and contact

　　The overall power consumption of the product is ≤ 3W

　　Tightening torque 0.5~0.6Nm

　　Working environment -40 ℃~+70 ℃. 5%~95% without condensation

　　Screw, gasket, and terminal material: copper material

　　Storage environment -40 ° C~+85 ° C. 5%~95% no condensation

　　Insulation resistance: The insulation resistance of each conductive circuit to ground and between conductive circuits shall not be less than 100MQ

　　Dielectric strength AC 2Kv, 1min, leakage current 5 mA

　　Impulse voltage 1.2/50us, ± 5KV, 3 times

• Trip relay