TW-CRX-52 Automotive Paint Online Colorimeter Laser Paper Phone Rear Shell Sample Color Detection

Description :

　　TW-CRX-52 Automotive Paint Online Colorimeter

　　1、 Instrument Introduction

　　1. Triangular measurement of color data, flicker, and particle grade at 15 °, 45 °, and 110 ° angles;

　　2. Built in automatic white calibration, no need for human intervention;

　　3. Simulate direct sunlight and slow light conditions, and use high-resolution CMOS sensors to measure and control flicker and particle levels;

　　4. Adopting stable and long-lasting LED light sources, which can be used for up to 10 years;

　　5. Rubber pads can prevent the instrument from sliding during reading;

　　6. Comes with a built-in LCD display screen, allowing real-time viewing of measurement results;

　　7. All metal body, with good texture and shielding characteristics;

　　8. Industrial grade communication cables and power supply cables can be bent more than 100000 times;

　　9. Provide reflectance measurement and analysis software to meet users' analysis, management, and traceability of test data; Provide industry standard testing reports to facilitate data communication among users.

　　7. ETC real-time calibration technology

　　The instrument is equipped with a built-in standard whiteboard as the measurement reference for the instrument. When the whiteboard is stained, the measurement accuracy of the instrument cannot be guaranteed. The spectrophotometer adopts ETC real-time calibration technology (Every Test Calibration), with a standard whiteboard set inside the optical system, and has accuracy and repeatability in each test.

2、 Instrument detail display

　　3、 Technical parameters

　　Model: TW-CRX-52

　　Measurement conditions: 45 ° illumination, observation at 15 °, 45 °, and 110 °

　　Lighting source: CLEDs (full band balanced LED light source)

　　Sensor: Silicon photodiode

　　Non contact measurement distance: contact measurement

　　Calibration method: Built in calibration

　　Wavelength range: 400-700nm

　　Half bandwidth: 5nm

　　Wavelength interval: 10nm

　　Measuring caliber: φ 7mm

　　Measurement time: 6s

　　Measurement interval: 1 second

　　Reflectivity: R (0% -200%)

　　Reflectivity resolution: 0.0001

　　Measurement parameters: CIE-L * a * b, L * C * h, scintillation index, surface particle grade

　　Standard observer: 10 °/2 °

　　light source A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30.DLF,NBF,TL83,TL84.U35

　　Color difference formula: Δ E * ab, Δ Ec, Δ Ep

　　Repeatability: Chromaticity value: Δ E * ab standard deviation within 0.03, Z-value greater than 0.05 (after calibration, continuously test the whiteboard 30 times with a measurement interval of 1 second)

　　Inter stage difference: within Δ E * ab 0.5 (average value measured on 12 color plates of BCRA series II)

　　Operating environment: 0 ℃ -45 ℃, relative humidity of 80% or lower (at 35 ℃), no condensation

　　Storage environment: -25 ℃ -55 ℃, relative humidity of 80% or lower (at 35 ℃), no condensation

　　Communication: Industrial USB, customizable with other interfaces

　　Power supply:+6DCV

　　Weight: 1.7kg

　　Dimensions: L180mm * W107mm * H118mm

AfterSalesService :

• colorimeter