Handheld fast oil fume detector, oil fume non methane total hydrocarbon particulate matter three in one oil fume analyzer XY-5021

Description :

　　XY-5021 Handheld Rapid Oil Fume Detector Oil Fume Non Methane Total Hydrocarbon Particle Three in One Oil Fume Analyzer

　　XY-5021 Handheld Rapid Oil Fume Detector

　　Product Overview

　　The XY-5021 portable rapid oil fume detector (three in one) (hereinafter referred to as the detector) is mainly used to collect the concentration of oil fume emissions in flues and chimneys. This detector meets the requirements of JJG 680-2007 "Verification Regulations for Smoke and Dust Samplers", JJG 518-1998 "Verification Regulations for Pitot Tubes", GB16157-1996 "Determination of Particulate Matter and Sampling Methods for Gaseous Pollutants in Fixed Pollution Source Exhaust", HJ/T48-1999 "Technical Conditions for Smoke and Dust Samplers", and GB18483 "Emission Standards for Cooking Fumes in the Catering Industry". The product has stable performance, easy operation, small portability, and stable flow rate, greatly reducing labor intensity.

　　Scope of Application

　　The detector is suitable for fixed flow sampling and concentration measurement of oil fume in fixed pollution sources, as well as measurement of oil fume parameters such as temperature, dynamic pressure, static pressure, and environmental atmospheric pressure and temperature parameters of flue gas, to evaluate the concentration of organized emissions of oil fume.

　　adopt standards

　　JJG 680-2007 "Verification Regulations for Smoke and Dust Samplers"

　　JJG 518-1998 "Verification Regulations for Pitot Tubes"

　　GB16157-1996 "Determination of particulate matter and sampling methods for gaseous pollutants in exhaust from fixed sources of pollution"

　　HJ/T48-1999 Technical Conditions for Smoke and Dust Samplers

　　GB18483 "Emission Standards for Cooking Fumes in the Catering Industry"

　　Main Features

　　4.1 Simple on-site operation, direct reading of oil fume, data can be output in more than 2 minutes;

　　4.2 Electronic flowmeter automatically controls flow and compensates for flow changes caused by voltage fluctuations, resistance, and temperature changes;

　　4.3 Using high-performance imported diaphragm pumps greatly improves stability, has a long service life, low noise, and overload protection function;

　　4.4 Measure flow rate and displacement based on pitot tube;

　　4.5 can measure smoke temperature, static pressure, and dynamic pressure;

　　4.6 Use high-resolution capacitive touch screen, high sensitivity, intuitive interface, and simple operation;

　　4.7 Equipped with Bluetooth printer for fast data output;

　　4.8 Equipped with USB drive export function, automatically generating tables for easy data processing;

　　4.9 Equipped with a built-in lithium battery, it can be directly measured on site to meet the needs of rapid monitoring;

　　4.10 Optional noise monitoring function.

　　working principle

　　The detector uses a sampling pump to extract oil fume samples. When the gas flows through the oil fume sensor, the oil fume concentration signal is sent to the microprocessor for processing to obtain the concentration. Based on the pitot tube and temperature sensor, the dynamic static pressure and oil fume temperature of the flue and chimney are measured and converted into the flow velocity of the flue and chimney.

　　technical indicators

　　The main technical specifications of the detector are shown in Table 1.

　　Table 1 Main technical indicators of the detector

AfterSalesService :

• Handheld rapid oil fume detector