Qingdao Xinye Environmental Protection XY-HS05C Air Pulse Ionization Chamber Radon Meter

Description :

Qingdao Xinye Environmental Protection XY-HS05C Air Pulse Ionization Chamber Radon Meter

Qingdao Xinye Environmental Protection Technology Co., Ltd

We are a comprehensive on-site manufacturer that integrates environmental research, design, production, maintenance, and sales.

Qingdao Lingheng Environmental Technology Co., Ltd

Belonging to Jiangsu Lingheng Environmental Technology Co., Ltd. Qingdao Branch, the main business scope is sales and services of online water quality monitoring instruments.

Service commitment:

Putting customer needs first, "today's quality, tomorrow's market, and service forever" is our guiding principle for serving customers at Xinye Environmental Protection Company, and it runs through all aspects of research and development, production, installation, sales, and after-sales service.

The company solemnly promises:

Improve communication and coordination mechanisms:By strengthening communication and exchange, improving the timeliness and accuracy of information transmission, going deep into the market, listening to user voices, and understanding customer instrument and equipment needs.

Our company promises:Complete the production tasks of the supplied products with quality, quantity, and on time, and transport the products to the customer's demand site in a timely manner to ensure normal operation.

Whole process monitoring:Customers only need one phone call, and the after-sales service department adopts a one-stop mode, comprehensive responsibility system, full monitoring and implementation, and tracking of processing results to ensure customer satisfaction.

　　Main application areas:

　　The XY-HS05C radon detector is a portable, intelligent, and next-generation radiation protection detection instrument. It is based on a room temperature and atmospheric pressure air pulse ionization chamber to detect radon and its derivatives, and achieve rapid measurement of radon concentration in the air.

　　Due to the 4 π angle detection of the alpha rays of Rn222, Po218, and Po214 decay parameters by the air pulse ionization chamber, the response speed is fast, the detection efficiency is high, and the measurement sensitivity is high, achieving rapid or continuous accumulation measurement of environmental radon concentration. Due to the fact that the detection of radon ****** daughter signals in air pulse ionization chambers is basically not affected by air temperature and humidity, it has the characteristics of high ****** performance and stable measurement data. Among many methods for detecting air radon, the ionization chamber has ideal radon detection performance. Currently, the ionization chamber radon measurement is the international standard radon chamber universal benchmark radon measurement method.

　　The main application areas of the product are:

　　XY-HS05C type: Equipped with an internal air pump, it features rapid sampling through gas flow and diffusion tracking. It is mainly used for instantaneous measurement of air radon and rapid detection of air radon in the field of environmental monitoring.

　　Due to the sensitivity of the ionization chamber to vibration, it is not suitable for use in environments with vibration. Therefore, this product is only suitable for continuous monitoring of environmental radon in a static state.

　　Standard suitability:

　　GB/T50325-2020 "Code for Indoor Environmental Pollution Control of Civil Building Engineering" - Pump suction pulse ionization chamber method, with very high sensitivity

　　The national standard GB/T14582-2020 "Standard Measurement Method for Radon in Environmental Air" is about to be issued, and the pulse ionization chamber method meets the national standard GB/T18883-2020 "Indoor Air Quality Standards" is about to be issued

　　GB/T18883-2020 "Indoor Air Quality Standards" is about to be issued

　　GB/T14582-2020 "Standard Measurement Method for Radon in Environmental Air" is about to be promulgated

　　GB/T16146-2015 "Indoor Radon and Its Offspring Control Requirements"

　　GBZ/T182-2006 "Measurement Specification for Air Radon and Its Decay Products"

　　U T/CECS569-2019 "Standard for Indoor Radon Detection in Buildings", GB50325-2020 referenced standards

　　2. Advantages

　　U has a small volume (90 * 252mm), light weight (1.6kg), and is easy to carry;

　　U has high sensitivity and stable measurement data, which is about 5 times more sensitive than the RAD7 radon detector;

　　Compared to using scintillation bottles to measure radon, the response speed is faster;

　　Compared to scintillation bottles and semiconductors, detectors do not need to avoid light;

　　Compared to semiconductors, temperature and humidity have less impact and the measurement data is more stable;

　　The ionization chamber is a detector used for radon gas measurement in standard radon chambers;

　　U can be installed on a universal camera rack to meet the standard requirements for on-site sampling at a height of 0.8-1.5 meters;

　　3. Technical indicators

　　Detector: ambient temperature and pressure air pulse ionization chamber, with a sensitive volume of 0.44L;

　　Detection objects: 222Rn, 220Rn and their derivatives (mixed);

　　Other parameters: synchronous measurement of temperature and humidity

　　Temperature: accuracy of 0.5 ℃;

　　Humidity: Accuracy 3% RH;

　　Anti interference: The circuit hardware vibration shielding function prevents interference signals from being recorded;

　　The software adopts a special filtering algorithm to increase its responsiveness and resistance to accidental vibrations;

　　Sensitivity: 1cpm ≈ 30Bq/m3; (i.e. ≈ 1.23cpm/pCi?)? L-1)

　　Detection lower limit: 2Bq/m3 (60 minute measurement cycle);

　　Measurement range: 2-30000 Bq/m3;

　　Uncertainty: ≤ 10% (K=2);

　　Measurement cycle: fast (10 minutes), medium (20 minutes), medium (30 minutes), and slow (60 minutes) settings;

　　Sampling method: built-in pump flow gas sampling (12 gases exchange their volumes in 2 minutes);

　　Response capability (>90%):>; 20 minutes (flow type)

　　Recovery ability (<10%):>; 120 minutes

　　Print storage: automatically saves 65536 measurement data;

　　Support on-site Bluetooth printing;

　　Communication interface: USB interface and Bluetooth interface, mobile app software (enhanced)

　　Display operation: OLED display, button adjustable;

　　Power supply: 3.7V/9Ah

　　Power consumption: 100mW, capable of continuous operation for 21 days (with built-in pump not working);

　　Working conditions: -18 ℃ -50 ℃, relative humidity ≤ 95% (no condensation water);

　　Host weight: approximately 1.6Kg;

　　Host size: 90 * 252mm (length) (HS05C);

　　On site installation: equipped with a camera mounting bracket;

AfterSalesService :

• Pulse ionization chamber radon detector