How much does the Dongfeng rear eight wheel, three one, twelve ton, four section arm crane cost

Description :

　　How much does the Dongfeng rear eight wheel, three one, twelve ton, four section arm crane cost

　　Truck mounted lifting and transportation vehicles are widely used in high-speed rail construction, tree hanging, prefabricated houses, oil fields, balance and inspection, telecommunications, electricity, factories, brick factories, cement board factories and other occasions

　　1. The crane adopts a fully hydraulic system, with 360 degree full rotation and an ultra long operating radius;

　　2. Manual (remote) throttle, adjustable rotation speed and lifting speed;

　　3.24 dimensional card sleeve type pipeline joint, high-precision cold drawn tube completely solves oil leakage;

　　4. XCMG crane adopts imported hydraulic seals with good quality and stable performance;

　　5. Adopting a new type of H-shaped leg, with a large leg span and good overall stability.

　　Our commitment:

　　All products produced and sold by our company, including the chassis, are covered by joint warranty at national service stations. The dedicated parts are covered by a three guarantee service for one year, and after-sales service is available within 48 hours,

　　Responsible for lifelong maintenance and providing lifelong free technical services. We are willing to serve you wholeheartedly and look forward to your on-site inspection of our factory's production strength and product technology. We will provide you with the services you need.

　　1. Telephone negotiation (or on-site inspection at the factory) -2. Contract signing -3. Production arrangement -4. Delivery acceptance -5. Signature confirmation

　　Leg form

　　Truck mounted crane legs: H-shaped legs are used, and each leg can be adjusted separately to make the frame level. The legs have a large span and good overall performance.

　　Operation form

　　Operation mode of Hubei Wuhuan crane: single-sided operation, left-right bidirectional operation, rotation angle: ± 360 degrees, continuous rotation, manual throttle can adjust rotation speed and lifting speed

　　Scope of application

　　Hubei Wuhuan Truck Mounted Crane is widely used in oil fields, inspection, telecommunications, power, factories, cement board factories, etc

　　optional

　　Hubei Chengli gantry crane can be equipped with 1-ton, 2-ton, 2.3-ton, 3.2-ton, 5-ton, 6.3-ton, 8-ton, 10 ton, 12 ton, 14 ton, and 16 ton cranes according to different vehicle models. Two arm, three arm, and four arm cranes can be selected.

　　In view of the current market situation, when buying a crane, it is important to pay attention to:

　　1、 Identify the manufacturer

　　Only by purchasing from the manufacturer can you get a discounted price, good quality, multiple car models to choose from, and direct contact with the manufacturer. The after-sales service is guaranteed, more convenient, faster, and more secure!

　　2、 Identify the crane accurately

　　When buying a crane, the main considerations are lifting capacity, operating speed, and duration of operation

　　The main brands include XCMG, Sany, Shimei, Hongchang Tianma, Chengli, and Crane

　　Generally, cranes have support legs, but the stability maintained by a pair of support legs is limited. Therefore, after loading a large tonnage crane, additional support legs need to be added to the frame.

　　There are usually two types of support legs installed on the frame: fixed support legs and movable support legs. Fixed legs can only extend or retract vertically, and cannot extend horizontally. The support width of a pair of legs can only reach the limit width of the vehicle. The structure is simple, lightweight, and suitable for small tonnage cranes;

　　Thickness and appearance of the cargo box mounted on the vehicle

　　The truck mounted cargo box is divided into striped and flat plate types, and striped cargo boxes are mostly used in the market. The thickness of a regular cargo box is generally two sides and four bottoms. The cargo box fence board is 2mm thick, and the bottom board is 4mm thick. The chassis can be equipped with anti slip plates or flat plates. Usually, it is recommended that users choose cargo boxes with three sides and five bottoms. These types of cargo boxes have high strength, strong bearing capacity, and are not easily deformed after long-term use.

　　Pull type structure of truck mounted cargo box

　　In the actual process of using the car, the standard length of the cargo box is not enough, and the pull-out cargo box with a crane has emerged (as shown in the figure below). The pull-out cargo box can meet the needs of customers without affecting normal loading, and has been recognized by a large number of users. The length of the on-board crane cargo box with blue license plate is 3.5 meters, which can be pulled by 40 centimeters. The length of the on-board crane cargo box with yellow license plate is 4.5 meters, which can be pulled by 50 centimeters. For the rear eight wheel, front four and rear eight wheel models, it can be pulled by about 80 centimeters. Truck mounted cargo box with self dumping function

　　Users can install a self dumping function on the cargo box according to their needs to improve operational efficiency. The bottom plate of the cargo box with self dumping function must be thickened and reinforced.

　　Truck mounted cargo box with ladder function

　　The truck mounted cargo box with ladder function is versatile, allowing for both lifting and transportation of excavators, increasing the vehicle's earning potential. The single bridge truck mounted cargo box is equipped with a ladder function, which can support 150 excavators. The rear eight wheel truck mounted cargo box with a ladder function can support 250 excavators.

　　The price indicated on the product is not the actual sales price. Before placing an order, it is necessary to consult with the manager. The price may vary depending on the specific requirements. Thank you for your cooperation.

　　1. The U-shaped arm crane is easy to use and has strong adaptability to comprehensive working conditions;

　　2. The U-shaped boom adopts an optimized multi section arc boom system, which has a large cross-sectional modulus, strong bearing capacity, good stability, and can significantly reduce the weight of the crane under the same bearing capacity conditions, meeting the requirements of lightweight;

　　3. The use of double stage large-span irregular square box support legs for U-shaped crane arms can effectively improve operational stability. The span of the support legs can reach 8.6 meters, and the use of double row ball slewing supports can effectively reduce the size and installation requirements of the entire machine's mechanical components and improve its usability;

　　The U-shaped boom crane has a wider operating range and outstanding lifting performance;

　　5. The application of the auxiliary arm, auxiliary winch, and auxiliary hook of the U-shaped arm crane provides a selection basis for the crane's light load, fast, large amplitude, and high height operations, and expands the product's application fields. Negative angle application improves the transportation performance of the product, with a wide operating range that can meet wide-angle operations of -11 ° -75 °. At the same time, it can achieve convenient replacement of the auxiliary arm, auxiliary hook bracket, and magnification;

　　The U-shaped boom crane has a beautiful and stylish appearance, which better embodies the production and manufacturing concepts of safety, environmental protection, and reliability.

　　Overall, the U-shaped crane arm has the advantages of being lighter, safer, more environmentally friendly, and more functional.

AfterSalesService :

• How much is a 12 ton truck mounted crane