Dongfeng rear eight wheel XCMG 12 ton 5-section arm crane manufacturer

Description :

　　Dongfeng rear eight wheel XCMG 12 ton 5-section arm crane manufacturer

　　Truck mounted lifting and transportation vehicles are widely used in high-speed rail construction, tree hanging, prefabricated houses, oil fields, balance and inspection, telecommunications, electricity, factories, brick factories, cement board factories and other occasions

　　1. The crane adopts a fully hydraulic system, with 360 degree full rotation and an ultra long operating radius;

　　2. Manual (remote) throttle, adjustable rotation speed and lifting speed;

　　3.24 dimensional card sleeve type pipeline joint, high-precision cold drawn tube completely solves oil leakage;

　　4. XCMG crane adopts imported hydraulic seals with good quality and stable performance;

　　5. Adopting a new type of H-shaped leg, with a large leg span and good overall stability.

　　Ground collapse causes the overturning of the car crane

　　Unfold all legs and lift the vehicle until the wheels have just left the ground (for a mid mounted crane without rear legs, let the front wheels just leave the ground), ensuring that the vehicle is level on both sides. If the support legs cannot be fully extended due to space limitations (especially the support legs under the crane), the lifting operation cannot be carried out according to the original lifting performance diagram, and the heavy load limit should be reduced according to the actual situation; After supporting the legs on the ground, the feet should not sink into the soil, otherwise wooden pads need to be added under the feet of the feet.

　　Before starting the work officially, operate the crane to perform several air runs on each movement to fully preheat the hydraulic system.

　　In view of the current market situation, when buying a crane, it is important to pay attention to:

　　1、 Identify the manufacturer

　　Only by purchasing from the manufacturer can you get a discounted price, good quality, multiple car models to choose from, and direct contact with the manufacturer. The after-sales service is guaranteed, more convenient, faster, and more secure!

　　2、 Identify the crane accurately

　　When buying a crane, the main considerations are lifting capacity, operating speed, and duration of operation

　　The main brands include XCMG, Sany, Shimei, Hongchang Tianma, Chengli, and Crane

　　Generally, cranes have support legs, but the stability maintained by a pair of support legs is limited. Therefore, after loading a large tonnage crane, additional support legs need to be added to the frame.

　　There are usually two types of support legs installed on the frame: fixed support legs and movable support legs. Fixed legs can only extend or retract vertically, and cannot extend horizontally. The support width of a pair of legs can only reach the limit width of the vehicle. The structure is simple, lightweight, and suitable for small tonnage cranes;

　　The on-board crane should avoid only adding oil without changing it:

　　Engine oil is essential in the use of diesel engines, mainly for lubrication, cooling, cleaning, and other purposes. Therefore, many drivers pay attention to checking the amount of lubricating oil and adding it according to standards, but neglect the inspection of lubricating oil quality

　　The replacement of deteriorated engine oil has resulted in some moving parts of the engine always operating in poor lubrication conditions, thereby accelerating the wear of various components. Under normal circumstances, the loss of engine oil is not significant, but it is easily contaminated,

　　As a result, it loses its function of protecting the diesel engine. During the operation of a diesel engine, many pollutants (such as soot, carbon deposits, and fouling generated by incomplete fuel combustion) will enter the engine oil. For new or overhauled machinery, there will be more impurities after trial operation,

　　If you rush to put it into use without replacing it, it is easy to cause accidents such as tile burning and shaft holding. In addition, even if the engine oil is changed, some drivers may not thoroughly clean the oil passage due to lack of maintenance experience or to save trouble, resulting in mechanical impurities still remaining in the oil pan and oil circuit.

　　The price indicated on the product is not the actual sales price. Before placing an order, it is necessary to consult with the manager. The price may vary depending on the specific requirements. Thank you for your cooperation.

　　1. The U-shaped arm crane is easy to use and has strong adaptability to comprehensive working conditions;

　　2. The U-shaped boom adopts an optimized multi section arc boom system, which has a large cross-sectional modulus, strong bearing capacity, good stability, and can significantly reduce the weight of the crane under the same bearing capacity conditions, meeting the requirements of lightweight;

　　3. The use of double stage large-span irregular square box support legs for U-shaped crane arms can effectively improve operational stability. The span of the support legs can reach 8.6 meters, and the use of double row ball slewing supports can effectively reduce the size and installation requirements of the entire machine's mechanical components and improve its usability;

　　The U-shaped boom crane has a wider operating range and outstanding lifting performance;

　　5. The application of the auxiliary arm, auxiliary winch, and auxiliary hook of the U-shaped arm crane provides a selection basis for the crane's light load, fast, large amplitude, and high height operations, and expands the product's application fields. Negative angle application improves the transportation performance of the product, with a wide operating range that can meet wide-angle operations of -11 ° -75 °. At the same time, it can achieve convenient replacement of the auxiliary arm, auxiliary hook bracket, and magnification;

　　The U-shaped boom crane has a beautiful and stylish appearance, which better embodies the production and manufacturing concepts of safety, environmental protection, and reliability.

　　Overall, the U-shaped crane arm has the advantages of being lighter, safer, more environmentally friendly, and more functional.

AfterSalesService :

• How much is a 12 ton truck mounted crane