High temperature steam pipeline insulation fixed bracket, flame resistance insulation pipe support drawing customized

Description :

　　Pipe support, also known as support, is a very important component of pipeline support and suspension systems. Guiding pipe support refers to the displacement of pipelines in the specified direction. The ordinary pipe supports on traditional insulated pipelines do not generate heat, causing significant energy consumption when in a state, which has attracted sufficient attention from relevant departments. From the perspective of insulation, ordinary pipe supports, as exposed pipe fittings, not only dissipate heat and energy outward, but also act as a thermal bridge to form an Ige temperature gradient heat transfer field through steel supports in contact, directly dissipating heat into the atmosphere. Taking a 200 ℃ steam pipeline as an example, at normal temperatures, the heat loss caused by ordinary pipe supports accounts for 3/5 of the total heat loss of the insulated pipeline. At the same time, the temperature gradient of the pipeline steel support formed by the heat transfer of non insulated pipe supports leads to electrochemical corrosion, which shortens the service life of the steel support. The outer protective steel pipe of the conduit is fully connected as a whole without any leakage.

　　Introduction to Thermal Insulation Sliding Pipe Support: Thermal insulation pipe support is widely used in the design and installation of various thermal and high-temperature pipelines. It provides a guarantee for the smooth operation of pipeline media. The ordinary pipe supports on traditional insulated pipelines do not generate heat and cause huge energy consumption when in a state, which has attracted sufficient attention from relevant units. From the perspective of insulation and energy conservation, ordinary pipe supports, as a type of pipe fitting, not only dissipate heat and lose energy to the outside; Moreover, as a thermal bridge, it forms a temperature gradient heat transfer field through the steel support in contact with it, directly dissipating heat to large and medium areas. Taking a 200 ℃ steam pipeline as an example, at normal temperatures, the heat loss caused by ordinary pipe supports accounts for 3/5 of the total heat loss of the entire insulation pipeline; At the same time, due to the heat transfer of non insulated pipe supports, a temperature gradient is formed in the steel support of the pipeline, resulting in chemical corrosion and shortening the service life of the steel support. Product attributes: Thermal insulation sliding pipe holder, which provides thermal insulation. In high-temperature pipelines, ordinary pipe holders experience energy loss due to their insulation properties. Steam pipe support and saddle support are a type of support used in chemical equipment, widely used in containers. Its structure is shown in the figure, consisting of a saddle shaped plate, two support plates, a bottom plate, and a vertical plate. The support plate is welded between the saddle plate and the bottom plate, and the vertical plate is welded on one side of them. The bottom plate is placed on the foundation and fixed with anchor bolts. The equipment is generally supported by two saddle shaped supports. If the equipment is too long and exceeds the allowable support range of the two supports, the number of supports should be determined.

AfterSalesService :

• Insulation fixed bracket