Gear reinforced alloy steel shot with a hardness of 0.8-1.2 and a hardness of 57HRC has a good strengthening effect

Description :

　　1、 Processing technology: It is refined through processes such as drawing, cutting, and strengthening. The particles of this product are uniform, with particle sizes ranging from 0.2mm-2.0mm. The hardness and density are highly consistent, with product hardness of HV450-520, HV530-600, HV610-660, and HV670-760, respectively.

　　2、 Service life: Irving has a service life of 3500 to 9600 cycles. The reinforced steel shot has strong toughness and is not easily broken, so it has a long service life and strong impact resistance. It can reach the shot blasting strength in a shorter time. The consumption during use is low, and it has a service life 3-5 times longer than ordinary steel shot of the same specification.

　　3、 Strengthening effect: It can obtain a microstructure of cyclic strain hardening in the surface layer of the workpiece and introduce optimized residual compressive stress field in the surface layer, while obtaining low surface roughness on the outer surface, thereby improving the fatigue life of the processed workpiece by 30%.

　　4、 Cleaning efficiency: It can bring high-quality shot blasting cleaning effect. Compared with ordinary steel shot, the efficiency of reinforced steel shot cleaning can be increased by 50%, exposing the metal color of the product.

　　5、 Dust emissions: With a longer service life, the dust generated will also be greatly reduced. The dust emissions are more than 30% lower than those of ordinary steel balls, reducing the load on the dust removal system, extending the service life of equipment, and reducing environmental pollution.

　　Grinding balls have the following advantages: high toughness and tensile strength, overcoming all the weaknesses of cast steel balls, no pores, and no breakage. Long service life, it is the most ideal metal abrasive among all metal abrasives.

AfterSalesService :

• Gear reinforced alloy steel shot