The national standard steel shot Anlandi brand steel shot is not durable and causes dust, which roughly reduces the service life of the protective plate by 10-30%

Description :

　　The steel shot, steel sand, and steel wire cutting shot mentioned are familiar to those engaged in casting, forging, and steel structures, mainly related to sand cleaning of castings, removal of oxide scale from forgings, removal of oxide scale and welding slag from steel structures, and so on. There are many manufacturers in the market that make steel shot, steel sand, and steel wire cutting shot, and the quality is also varied. If you are not careful, you will purchase unqualified steel shot, which not only has a high crushing rate and large dust, but also may cause secondary pollution of the workpiece and accelerate the consumption of shot blasting machine parts.

　　As a user of steel balls, how can we test the quality of steel balls without relevant testing equipment? 1. First, prepare a hammer and find a hardened cement (or steel plate); 2. Place the steel shot on the cement floor (or steel plate); 3. Smash the steel ball with a hammer; 4. Observe whether the steel shot is broken. So far, the operation process is complete. Through the small experiment just now, two situations have occurred: 1. Steel shot breakage: This situation is mostly due to the steel shot not meeting the standard, which will result in poor durability and high steel shot breakage rate during use; 2. The steel shot was flattened: if it is too flattened, it indicates that the hardness of the steel shot cannot be reached, and the cleaning efficiency is low; 2. The steel shot is slightly flattened, the steel shot is qualified, and it is relatively durable during shot blasting. This process simulates the principle of steel shot hitting the workpiece during shot blasting, for reference only. If it is confirmed whether the steel shot is qualified, it is recommended to use specialized testing equipment for testing. Anlandi steel shot can be tested for free!

　　If there is a lot of dust in the cleaning room of the shot blasting machine, there are two reasons: 1. The steel shot is unqualified and has a high breakage rate, which can be solved by directly changing the supplier. 2. The dust removal of the shot blasting machine has been neglected for a long time and cannot effectively remove dust, resulting in excessive impurities of waste steel shot in the circulation, thereby reducing production efficiency and increasing production costs. In severe cases, it may cause secondary pollution to the workpiece.

　　In summary, the quality of steel balls and various abnormal phenomena in equipment should be taken seriously by operators to ensure the quality of workpieces and improve production efficiency.

AfterSalesService :

• National standard steel shot Anlandi brand