Grinding ball reinforced steel ball 0.6-1.2, durable and cost-effective

Description :

　　 Grinding balls comply with the wire cutting ball standard JB/T8354-1996, which not only has the advantages of wire cutting balls, but also has the following characteristics:

　　1、 The shape of the grinding ball should be elliptical, and the number of ultra long and flat sheet-like particles in the finished product should not exceed 10% of the tested quantity;

　　2、 The specification range of grinding balls is 0.6 #, 0.8 #, 1.0 #, 1.2 #, 1.4 #, 1.7 #, 1.8 #, 2.0 #, 2.4 ##

　　3、 Technical requirements: The chemical composition and content of grinding pills should comply with the following regulations:

　　4、 Hardness grinding ball HRC: 50-65 (non tempered) HRC: 40-50 (tempered)

　　5、 The metallographic structure of the grinding ball is tempered martensite and tempered martensite

　　6、 The abrasive ball with cracks shall not exceed 3% of the tested quantity

　　7、 The physical properties of the grinding ball are arbitrary, with a tensile strength of 1520N/m 2

　　8、 The cycle life of grinding balls is more than three times that of cast steel balls and steel wire cutting balls. In summary, grinding balls have obvious advantages in manufacturing and raw material selection compared to other products. They have the characteristics of high manganese steel, and grinding steel balls have no holes or cracks. In addition, the hardness of grinding balls is balanced. Compared with other products such as steel wire cutting balls and cast steel balls, they have poor toughness, short service life, high cost, and relatively small applicability; The above advantages are sufficient to illustrate that grinding steel balls is much stronger than other projectile products. When it comes to cost-effectiveness, the same performance is better than quality, the same quality is better than price, superior quality, and superior price. Under the same conditions, the ultimate goal of using the product is to achieve better surface cleaning. However, the national standard for cast steel balls allows for defects such as porosity, cracking, and short service life. Steel wire cutting balls are non-conductive, have sharp edges, and run on rails, causing significant damage to equipment and workpieces and increasing costs; Grinding balls overcome all the weaknesses of the above two products, with no pores or cracks, and their lifespan is 2.5 times that of cast steel balls.

　　The superiority of grinding balls over cast steel balls is reflected in the following aspects1. The ingredients of the grinding pill are stable. 2. Grinding balls have high toughness and tensile strength. 3. Grinding balls overcome all the weaknesses of cast steel balls, without pores or breakage. 4. Long service life. Consumption ratio of grinding balls to cast steel balls:

　　The benefits of using grinding balls: 1. The surface color of the workpiece after cleaning is silver white. 2. Less environmental pollution. 3. The labor intensity of workers has decreased. 4. High efficiency, low pill consumption, and reduced production costs.

AfterSalesService :

• Grinding ball strengthens steel ball