Factors affecting the quality of steel shot: Particle size S2.5-S3.0mm: Content of ferrosilicon and manganese iron, hollow shell rate, and tempering uniformity Particle size S2.5-S3.0
Category:
hardware/abrasive/Polishing paste
Model:
S2.5-S3.0
Brand:
Anlan Di
model:
S2.5-S3.0
main ingredients:
Carbon, manganese, silicon, sulfur, phosphorus
Specification and weight:
one
granularity:
About 2.5-3.0mm
manufacturer:
Shandong Blue Earth Metal Products Co., Ltd
Retail Price
5,300.00USD
重量
kg
- Product Description
-
model S2.5-S3.0
main ingredients Carbon, manganese, silicon, sulfur, phosphorus
Specification and weight one
granularity About 2.5-3.0mm
manufacturer Shandong Blue Earth Metal Products Co., Ltd
Description :
A heat treatment process in which the semi-finished steel shot is heated to around 900 degrees Celsius by a continuous quenching furnace to reach a molten state, and rapidly quenched with water to refine the grain structure. The purpose is to bridge the micro cracks on the surface of the steel shot, make its internal metallographic structure denser, improve toughness and impact resistance; Except for a few steel shot factories nationwide, there is no ability for secondary quenching.
National standard steel shot production line: scrap steel (alloy) → medium frequency furnace → centrifugal atomization → drying → coarse screening → round selection → screening → secondary quenching → tempering → fine screening → packaging.
National standard steel sand production line: scrap steel (alloy) → medium frequency furnace → centrifugal atomization → drying → coarse screening → round selection → screening → secondary quenching → crushing → coarse screening → tempering → fine screening → packaging.
AfterSalesService :
Key words:- Factors affecting the quality of steel shot
More Products
