Steel shot consumption per ton Steel shot Processing several tons of workpieces High quality steel shot manufacturer

Description :

　　For manufacturers who use shot blasting machines, the consumption of steel shot is the most direct factor affecting production costs. Without knowing the consumption of steel shot, it is impossible to calculate production costs. Taking castings as an example, Shandong Blue Earth Metal Technology Co., Ltd. will briefly explain the reference value of steel shot consumption:

　　Casting workpieces: Large castings of the same weight consume more steel shot than small castings, which is easy to understand because castings of the same weight have a larger surface area. The same casting is related to its surface hardness, the higher the hardness, the greater the consumption of steel shot; The lower the hardness, the less consumption. According to statistics, one ton of steel shot can clean about 100 tons of castings. If the casting structure is complex and causes waste of steel shot, these are not included in the consumption of steel shot.

　　Section steel and molds: Due to different workpiece models and hardness, the same consumption rate varies greatly. The higher the hardness of the workpiece, the greater the loss. Basically, 1 ton of cast steel shot can process about 130 tons of steel.

　　The reasons for the sudden increase in steel shot consumption can be summarized by the Anlandi steel shot editor as follows:

　　1. Adjust the angle of the shot blasting machine's shot blasting wheel; Effectively apply steel shot and steel sand to the workpiece while avoiding the discharge of useful steel shot and steel sand in the pellet separator or dust collector.

　　2. Timely retrieve the leaked steel shot and steel sand outside the shot blasting machine.

　　3. Prevent steel shot and sand from being carried away with the workpiece.

　　4. Regularly inspect the shot blasting machine for any damage or leaks.

　　5. Reasonably add settling boxes.

　　6. Replace the sealing rubber plate of the shot blasting machine in a timely manner.

　　7. Do a good job in the recycling and screening of steel shot and steel sand for the shot blasting machine.

AfterSalesService :

• Steel shot consumption