Reinforced alloy steel shot with complete models and wide applicability

Description :

　　As a production-oriented enterprise, saving production costs is of utmost importance; In the process of purchasing raw materials, although price is important, product quality cannot be ignored. Especially in the metal abrasive industry, the quality of steel shot and grit varies greatly, but does the steel shot and grit you are using really meet national standards? Has the consumption of steel balls increased? Don't be in a hurry, let Anlandi Steel Ball editor give you some guidance:

　　1、 What is the hollow ratio of national standard steel shot? How to define granularity size? How should the cleaning speed be? Anlandi's national standard steel balls are strictly in accordance with the standards of the Ministry of Metallurgy and have been built into the most reputable brand according to the ISO9001 certification system. Steel shot is irregular circular or approximately circular, and the particle size distribution is also in accordance with metallurgical standards. For example, not all steel shot diameters are 1.0mm for a 1.0 cast steel shot. It may include 0.8-1.2 shot diameters, which are selected in a certain proportion to improve the service life of the steel shot and the cleaning speed of the workpiece.

　　In addition, steel shot is a type of casting product, and casting defects such as hollow and irregular shapes cannot be avoided. However, Shandong Landi exceeds the national standard to minimize hollow and irregular shapes, controlling them below 5%. Regarding the cleaning speed, it is directly related to the choice of steel shot model, which plays a decisive role, and the standardized operation of the shot blasting machine (such as adjusting the throwing angle, etc.).

　　2、 Is the usage of steel balls relatively increased compared to before?

　　Has the recent production volume been unstable and increased compared to before

　　2. Have the angle of shot blasting and the air volume of the dust collector been adjusted during the ejection process

　　3. During the use of the shot blasting machine, is the ejection speed adjusted

　　4. The degree of corrosion and sand adhesion of the workpiece

　　5. Regarding the differences in hardness, technical requirements, and processing levels of workpieces, in short, the purpose of enterprise survival is to make profits. Therefore, we cannot miss any profitable business opportunities. Natural selection is essential for survival. Only through competition can we make progress and become stronger.

　　Analysis of customer feedback problems: Customer feedback problems usually include: increased consumption, hardness, unqualified particle size, unqualified components, unqualified hollow irregular shapes, excessive packaging problems, high abrasive consumption, high analysis of abrasive consumption, high analysis of elements, and violation of procedures; Inability to accurately count; Deliberately fabricating data; Equipment: The air volume for material leakage and dust removal is too high, and the angle of the throwing head orientation sleeve is not suitable. Abrasive: the hardness is not suitable or the particle size is not suitable. Workpiece: changes in workpiece size, sand adhesion, rust and other conditions (easily overlooked). Based on the analysis and summary of the above results, we can conclude that there are various reasons for the increase in consumption. In addition to improper personnel operation, equipment factors, and improper selection of abrasives, different workpieces can also cause an increase in consumption.

AfterSalesService :

• Reinforced alloy steel shot