High chromium shot blasting machine blades have high toughness, strong wear resistance, and can be customized according to samples

Description :

　　The shot blasting machine blades are located inside the shot blasting machine, and the shot blasting machine (commonly known as the throwing head) is the heart of the shot blasting machine. The position of the blades is crucial, and their quality is directly related to production costs and workpiece cleaning effectiveness. Because the blades work in a high-speed rotating impeller, they have to withstand both the wear of steel abrasive and the erosion wear of high-speed abrasive flow. Under these two forms of wear, the usability of the blades depends on the blade material. So, replacing unqualified blades is time-consuming, labor-intensive, and delays production.

　　For shot blasting machine blades, it is recommended that customers choose high chromium Because both in terms of manual replacement frequency and blade lifespan, high chromium products are more cost-effective, but low chromium shot blasting machine accessories dominate the market for most of the market, because low chromium products have lower prices and are easier to win bids. High chromium shot blasting machine accessories are an investment, but the daily consumption is low. For example, if the protective plate of the shot blasting machine room is made of high chromium, it should generally not be replaced after three or four years.

　　After the application of high chromium wear-resistant cast iron on shot blasting machine blades, the uniform service life of the blades can be over 400 hours. The use of cold iron to chill the surface of the blade not only achieves sequential solidification of the casting, but also produces a dense and even fine grain structure on the blade surface. Due to the reasonable heat treatment process, the surface hardness after heat treatment is HRC60-65, which enables the comprehensive function of the blade to be significantly exerted, thereby ensuring that the blade can withstand repeated impacts of steel sand for a long time, exhibiting good wear resistance and a longer service life. On this basis, the shot blasting machine blades produced by Anlandi Company have also added copper elements, further increasing the service life of the blades.

AfterSalesService :

• High chromium shot blasting machine blades