Overhaul of shot blasting machine equipment, high wear resistance manganese plate, sand leakage plate, polishing head, and blue ground manufacturer

Description :

　　The materials of wear-resistant parts are high-strength steel and high chromium cast iron. We can also produce various non-standard corrosion-resistant, heat-resistant, and wear-resistant castings according to user requirements. Using Q034 polishing head as an example, introduce the accessories of shot blasting machine. Shot blasting machine accessories shot blasting wheel Q034, also known as shot blasting machine head, shot blasting wheel assembly. The specifications and models of shot blasting machine accessories Q034 include 7.5kw, 11kw, 15kw, 18kw, 22kw, etc. according to the power. Shot blasting machine accessories: The main components of shot blasting machine Q034 include blades, impellers, directional sleeves, shot separation wheels, protective plates, etc. Shot blasting machine: The double discs in the shot blasting machine are riveted together to form an impeller body, which is equipped with 8 blades. The impeller body is mounted on a main shaft driven by an electric motor together with a shot wheel located at the center of the shot blasting wheel. The inner lining of the cover has a protective plate, and the cover shell is equipped with a directional sleeve and an injection tube. During operation, the pellets flow into the shot blasting machine through the inlet tube. The pellet wheel that rotates synchronously with the blades gives the projectile its initial velocity. The projectile flies out through the window of the directional sleeve and is thrown onto the high-speed rotating blades outside the directional sleeve. After being further accelerated by the blades, it is ejected onto the surface of the cleaned workpiece. Because the synchronous rotation of the pellet wheel and blades ensures the vibration free transmission of pellets to the blades, thereby reducing wear on the blades. Before the operation of the shot blasting machine, the wear of the blades should be checked. If the blades are worn, they should be replaced in a timely manner. The blades should be replaced in pairs, and the mass difference between each pair of blades in the same group should not exceed 5 grams. Otherwise, vibration or abnormal noise may occur during the operation of the shot blasting machine, causing damage to other components and seriously damaging the motor.

AfterSalesService :

• Overhaul of shot blasting machine equipment