The hook type shot blasting machine models are divided into double hook and single hook, which can be customized according to the size of the workpiece

Description :

　　As the standard model of shot blasting cleaning machine, the hook shot blasting machine has a working cylinder diameter ranging from 900 to 1300 mm and a height ranging from 1300 to 3500 mm. The standard model comes with 2-7 throwing heads and a load capacity of 10000 kilograms. This shot blasting machine has high production efficiency and a wide range of flexibility, making it an ideal cleaning and strengthening equipment. It is easy to operate, just load the workpiece to be processed onto the machine, press the start button, and after a short time (usually 5-7 minutes), the entire cleaning process is completed, removing all dust and residual shot materials. It is mainly suitable for surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including fragile and irregularly shaped workpieces. Suitable for surface cleaning or strengthening of multiple varieties, medium and small batches of castings, forgings and riveted welded parts, especially for the cleaning or strengthening of slender thin-walled parts that are in contact. It can apply strong shot blasting to the surface of steel in its original state, removing rust spots, welding slag, and oxide scale to obtain a uniform and smooth metallic luster surface, in order to remove stress, improve the surface coating quality and anti-corrosion performance of steel.

　　Advantages of hook shot blasting machine: 1. Using a large shot blasting volume and high ejection speed BMD shot blasting wheel, it can significantly improve cleaning efficiency and achieve satisfactory cleaning quality. 2. The simulation projection diagram (including the determination of the model, number, and spatial layout of the shot blasting equipment) and all drawings of the shot blasting machine are completely drawn using computer-aided design (CAD), making the selection and layout of the shot blasting equipment more reasonable. Improved the utilization rate and labor productivity of the projectile, ensured the cleaning effect, and reduced the wear on the chamber protective plate. 3. Adopting the popular form of no pit structure not only saves the construction cost and time of pit foundation, but also solves the problem of sand corrosion and agglomeration in the hoist caused by water storage in the pit for southern users. 4. Rolling Mn13 plate protection is used to clean the indoor hot zone. Compared with the previous rubber plate protection, its service life is greatly improved, and it has a beautiful appearance and is easy to replace. It is a popular way of protecting the cleaning machine room today.

AfterSalesService :

• Hook type shot blasting machine model