Vertical box type bucket elevator wq888 Shell vertical bucket elevator

Description :

　　Ring chain wear-resistant bucket elevator wq888

bucket elevatorSuitable for lifting from low to high, the supply material is fed into the hopper through a vibration table and the machine automatically runs continuously to transport upwards. The conveying speed can be adjusted according to the conveying capacity, and the lifting height can be selected as needed. The hopper is self-designed and manufactured, and the PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. It is designed to be matched with vertical packaging machines and computer measuring machines, suitable for lifting and feeding products such as food, medicine, chemical industry products, screws, nuts, etc. The automatic stop and start of the machine can be controlled by the signal recognition of the packaging machine.

　　Overview:

　　The bucket elevator has significant advantages such as large conveying capacity, high lifting height, stable and reliable operation, and long service life.

　　The hopper vertical elevator has the following characteristics:

　　1. The conveying capacity is large, and compared to the HL type with the same bucket width, the conveying capacity of TH type is nearly doubled:

　　2. We have adopted an assembled sprocket. The wheel body and rim are connected by high-strength bolts. After the sprocket wears out, the bolt can be unscrewed and the wheel rim can be replaced, which is convenient to replace and saves disassembly materials, reducing maintenance costs;

　　3. The lower part adopts a heavy hammer lever type tensioning device, which can achieve automatic tensioning. After installation, there is no need for adjustment, and a constant tension can be maintained to ensure the normal operation of the machine, avoiding slipping or chain detachment;

　　4. The traction component is a low-alloy high-strength circular chain, which, after appropriate heat treatment, has high tensile strength and durability, and a long service life.

　　The bucket elevator is used for discharging materials by mixing or gravity, and for loading materials by digging. It is suitable for conveying low abrasive materials in powder, granular, and small pieces with a bulk density of no more than 1.5t/m3, and the temperature of the materials should not exceed 250 degrees.

　　The bucket elevator is equipped with two types of hoppers:

　　Zh type (medium deep hopper) is generally used for conveying wet, agglomerated, and difficult to throw out materials, such as wet sand, molding sand, fertilizers, alkali powder, etc.

　　SH type (deep bucket) is commonly used for conveying dry, loose and easily thrown materials such as cement, crushed stone, coal blocks, etc

　　Keda brand bucket elevator screw conveyor

　　Hengxin Machinery is spread all over the world. Scope and characteristics: Used for vertical conveying of materials, with a conveying height of 3-60 meters, suitable for vertical lifting of materials in large and medium-sized three-dimensional structure feed factories. This equipment has a compact structure, small footprint, wide applicability, and good sealing performance.

　　Scope of application:

　　The TD type bucket elevator is suitable for conveying loose density powder, granular, and small block shaped non abrasive and semi abrasive bulk materials upwards, such as fertilizers, grains, coal, sand, coke powder, cement, crushed ores, etc.

　　Main features:

　　1. Wide range of improvement: This series of bucket elevators has fewer requirements for the types and characteristics of materials. It can not only improve general powder and small particle materials, but also improve materials with high grindability.

　　2. Good sealing and minimal environmental pollution.

　　3. Low driving power, using inflow feeding and induction unloading; Adopting a dense arrangement of large capacity hoppers, there is almost no material return or excavation during material lifting, resulting in less ineffective power.

　　4. Long service life: The feeding of the elevator adopts an inflow type, without the need for digging with a bucket, and there is little squeezing and collision between materials. This machine is designed to ensure that materials are less scattered during feeding and unloading, reducing mechanical wear and tear.

　　5. High lifting height: The elevator runs smoothly, so it can achieve a high lifting height.

　　6. High operational reliability: Advanced design principles and manufacturing processes ensure the reliability of the entire machine's operation.

　　Structure and working principle:

　　It is mainly composed of a machine head, a barrel, a machine base, a hopper, and a sprocket. The motor drives the chain to lift the fixed hopper on the chain after excavating the material, and then discharges it to the material outlet after winding around the head wheel.

Granular feed bucket elevator

AfterSalesService :

• Vertical box type bucket elevator