Xinjiang fertilizer strain pneumatic conveyor XWZF folding pneumatic ash suction machine

Description :

　　Xinjiang fertilizer strain pneumatic conveyor XWZF folding pneumatic ash suction machine

　　Fly ash conveyors are widely used in industries such as building materials (cement, fly ash, mineral powder), grain, chemical, power, fuel, metallurgy, etc. The product runs reliably and is easy to achieve dust-free, environmentally friendly, and intelligent loading and unloading. Modular structure and serialized products can meet the majority of customers' bulk requirements. The integrated assembly and meticulous factory debugging reduce the customer's on-site installation and debugging to a low level of Zui. We can provide worry free bulk and dust removal solutions with good results and reasonable costs according to the customer's bulk working conditions and needs.

　　Video installation steps for fly ash conveyor

　　1. Fan, main power. Usually, the two are assembled at the factory, and after receiving the goods, only the connecting parts need to be inspected.

　　2. Pulse tank. Usually, this part is in a horizontal transportation state, and after unloading, there is no need to rush to stand upright. You can first check the connection position of its components; Observe from the bottom of the tank and check if the filter bag of the filter cartridge has fallen off (if it falls off during horizontal transportation, it is a normal phenomenon); Check if the pulse meter has water ingress; Check if the flange bend at the top or side feed inlet of the tank is installed (sometimes removed for transportation convenience). After the above preparations are completed, the pulse tank should be erected on the premise of ensuring a solid foundation.

　　3. Shutter. Fix the air shutter and pulse tank with screws (our company will decide whether to install them properly based on transportation conditions when leaving the factory). When fixing, the position of the air shutter motor and junction box should be considered for ease of use.

　　Note: Some models may be equipped with a closed fan flange iron ring, which should be fixed in place at this time.

　　4. Base. For a device that integrates blowing and suction, the pulse tank can be fixed to the base, taking into account the position of the feeding port.

　　5. Longmen frame. Usually, the gantry consists of one base, four square tube legs, two square tube cross braces, and four channel steel diagonal braces, which can be fixed with screws, and then the pulse tank can be placed on it

　　6. Pipeline. First, connect the soundproof pipe and steel pipe to the fan (some models also require steel pipes on the pulse tank), then connect the fan steel pipe to the top (or side) bend of the pulse tank with a shorter hose, and finally install the inlet and outlet hoses.

　　Note: Heat treatment can be applied to the hose connection to soften it for easy insertion and removal. After installing the hose, clamps should be used to secure it.

　　7. Suction nozzle. Just connect it to the feeding hose.

　　8. Air pump. Used in conjunction with the pulse tank and connected to the pulse valve.

　　9. Others. When the total power of the equipment exceeds 30Kw, it should be ensured that the local area has the corresponding power supply capacity and equipped with soft start devices such as variable frequency starters.

AfterSalesService :

• Xinjiang fertilizer strain pneumatic conveyor