Tourist attraction signs, scenic area signs, traffic signs, choose Guocheng traffic signs

Description :

　　Traffic signs are graphic symbols that display traffic regulations and road information. They can provide vivid, specific, and concise expressions of traffic regulations, as well as convey content that is difficult to describe in words. They are used to manage traffic, indicate driving directions, and ensure smooth and safe roads. Applicable to highways, urban roads, and all dedicated roads, with the nature of laws and regulations, vehicles and pedestrians must comply.

　　1. The entire body of the welding process should be free of any cracks, missed welds, continuous porosity, undercutting, etc. The weld seam should be smooth and flat, without any protrusions or undulations, and without any welding defects. A welding inspection report must be provided. 2. Electrical door a. The electrical door adopts plasma cutting. b. The electrical door and the lamp body are seamlessly integrated, with no welded protrusions at the opening, resulting in high structural strength. c. There is a reasonable operating space and electrical installation accessories inside the door. d. The gap between the door and the pole should not exceed 1 millimeter and have good waterproof performance. e. There is a specialized fastening system for Inner Mongolia traffic sign poles, which have good anti-theft performance. Their fixing bolts are opened using non universal tools. f. The electrical door should have high interchangeability, reasonable operating space inside the door, and provide 3% of electrical door accessories. g. A M8 × 30 bolt should be firmly welded to the visible lower left part of the lamp post working door and hot-dip galvanized together with the lamp post for connecting the cable PE line.

　　Main features: 1. The board material can be selected from aluminum plate, aluminum-plastic panel, galvanized sheet, extruded sheet, etc. 2. The panel reflective material can be selected from domestic engineering grade, high-strength reflective film, imported 3M reflective film, etc. 3. Computer engraving, machine film coating, stable performance, uniform brightness, and good display effect. 4. Install a sliding aluminum groove on the back and secure it with clamps on the upright pole. 5. The specifications and models shall be customized according to the design drawings. 6. The aluminum plate thickness shall comply with the national standard road traffic safety signs GB5768-2009, including 1mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, and 3.0mm (recommended). Aluminum plastic panel thickness: 3.0 mm, 4.0 mm. Thickness of extruded sheet: 3.0 mm. Thickness of galvanized sheet: 1mm, 1.5 mm, 3.0 mm. Reflective film materials can be selected from ordinary engineering grade, domestic grade, and 3M reflective film imported from the United States (recommended).

　　During installation, the signboard should be appropriately supported and reinforced, and its surface should be protected against damage. The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. f. All steel in contact with aluminum alloy or other metals in the logo should be protected to prevent corrosion of the steel or aluminum alloy, and the protective measures should be approved by the supervising engineer. Steel parts should undergo pre-treatment such as degreasing and rust removal before painting treatment. After processing, hot-dip galvanizing should be carried out, and the surface of the coating should be practical and smooth, without sagging, dripping or excess agglomeration. The surface of the plated part should be free of defects such as plating leakage. The thickness of the coating should meet the requirements of relevant regulations. Fasteners such as bolts, nuts, and connecting accessories should also be galvanized.

　　Hebei Guocheng Transportation Facilities Co., Ltd. - Common specifications for traffic sign poles include the following: Traffic sign pole column diameter: φ76、φ89、φ102、φ108、φ114、φ121、φ127、φ133、φ140、φ152、φ159、φ165、φ168、φ180、φ194、φ219、φ273、φ325、φ351、φ377、φ406、φ426、φ478、φ530 Wait. Production process of traffic sign poles: Steel pipes are welded and then hot-dip galvanized as a whole. Column thickness: 3.5mm-12mm. The larger the sign and the higher the safety factor requirement, the thicker and thicker the column will be.

AfterSalesService :

• Tourist attraction signs