Cantilever sign post, traffic sign post, Hebei Guocheng
Category:
Security/Traffic safety equipment/Other traffic safety equipment
Model:
as per customer's request
Brand:
Hebei Guocheng
model:
as per customer's request
Retail Price
3,280.00USD
重量
kg
- Product Description
-
model as per customer's request
Description :
Cantilever traffic sign pole - F-type traffic sign pole, T-shaped traffic sign pole. Cantilever traffic sign pole is a sign board installed on the cantilever, and the height of the lower edge of the sign from the ground should be greater than the clearance height specified for the road. 5. The gantry traffic sign pole is installed on the gantry, and the height of the lower edge of the sign above the ground should be greater than the clearance height specified for the road. 6. Attached traffic sign post: The sign is attached and installed on the overpass and nearby structures, and is divided into two types: attached on the roadway and attached on the road according to the position of the attached layout. 3、 Maintenance of road traffic sign posts. 1. The setting (adjustment) of road traffic signs should be completed before the completion and opening of new (renovated, expanded) roads, and the signs related to these new (renovated, expanded) roads in the road network should also be adjusted synchronously to improve their settings. When road traffic conditions change, the setting of relevant signs should be adjusted in a timely manner. Highway number and city road name signs should be used as much as possible to enable road users to understand their route and location. 3. The logo should be regularly cleaned and maintained to maintain sufficient reflectivity and ensure visual recognition. During the use of the logo, it should also be avoided from being obscured by numbers or being affected by street lighting that affects visual recognition. The shape and color of the logo should comply with the provisions of this section during its service life.
galvanizing
The quality of galvanization directly affects the quality of the lamp post. Galvanization is required to be carried out according to national standards, and the surface after galvanization should be smooth, without color difference, and there should be no sagging. Lamp posts with severe sagging must be recoated.
powder coating
The purpose of spraying is twofold: firstly, for aesthetics, and secondly, for corrosion prevention. 13.1 Polishing: Use a polishing wheel to smooth the surface of the galvanized pole, ensuring a smooth and even surface of the lamp post. Straightening: Straighten the polished lamp post and shape the mouth. The non straightness of the lamp post must reach 1/1000, and the diameter requirement is: small pole ≤± 1mm; high pole ≤± 2mm. Galvanize all door panels, including zinc hanging, zinc leakage, and zinc storage in lock holes. When drilling screw holes, the electric drill must be perpendicular to the door panel, and the gap around the door panel should be kept flat. After the screws are fixed, the door panel must not be loose and must be firmly fixed to prevent it from falling off during transportation. Spraying powder: Place the lamp post with the door installed into the spraying room, spray the color of the plastic powder according to the production plan requirements, and then enter the drying room. The temperature and insulation time of the drying room must strictly follow the requirements of each plastic powder to ensure the quality requirements such as adhesion and smoothness of the plastic powder.
AfterSalesService :
Key words:- Cantilever sign post
