Explosion proof instrument box with display window, observation window, explosion-proof instrument box customized by manufacturer, Luoping explosion-proof

Description :

　　detailed introduction

　　Specially designed explosion-proof distribution box and explosion-proof socket box as required

　　Main technical parameters:

　　1. Execution standards: GB 3836.1, GB 3836.2, GB 3836.3, GB 12476.1, IEC 60079

　　2. Explosion proof signs: Exde Ⅱ BT6, DIP A20 TA, T6

　　3. Rated voltage: AC 220V/380V

　　4. Rated current of main circuit: 20A~250A

　　5. Number of branches: 2, 4, 6, 8, 10, 12

　　6. Rated current of branch: 1A, 3A, 5A, 10A, 15A, 20A, 25A, 32A, 40A, 50A, 60A

　　7. Protection level: IP54 (IIB), IP55 (DIP), IP65 (with rain cover)

　　8. Anti corrosion grade: WF1

　　9. Inlet specifications: G1/2 to G3 '

　　10. Applicable cable outer diameter: Φ 6~Φ 55mm

　　11. Inlet direction: bottom in and bottom out, bottom in and top out, top in and top out, or top in and bottom out

　　Performance parameters of mobile explosion-proof distribution box

　　1. The explosion-proof control box shell is made of ZL102 aluminum alloy die-casting or steel plate welding, with high-voltage electrostatic spraying on the surface and stainless steel exposed fasteners. The product has a beautiful appearance.

　　2. The explosion-proof control box is well-designed, safe and easy to use. Our company provides a one-year free warranty

　　3. The box drawing can be provided by your company or produced by our company on behalf of you

　　4. The explosion-proof lighting power distribution box adopts a composite and modular structure, and each circuit can be freely assembled according to needs. The general switch box adopts an explosion-proof structure, and the busbar box and outlet box adopt an increased safety structure

　　5. The internal components can be installed with high voltage circuit breakers or molded case circuit breakers according to user requirements. Such as DZ47, C65, CM1, etc.

　　6. It can be customized according to customer requirements, such as installing surge protectors, ammeters, voltmeters, etc., and can also be equipped with padlock metal handles.

　　7. Suitable for lighting and power lines, with functions such as disconnection, overload, voltage loss protection, and automatic short-circuit cut-off. Steel pipes or cables can be used for wiring 8. Complies with the requirements of GB3836-2000 and IEC60079 standards.

　　Precautions for Mobile Explosion proof Distribution Box

　　Before installing and using the product, check whether the technical data on the nameplate matches the usage situation;

　　Before installation and maintenance, the front power supply must be cut off;

　　3. When the incoming and outgoing cables pass through the rubber sealing ring, they must be tightened with washers and compression nuts to ensure that the seal and cables are not loose;

　　During use, if the sealing ring experiences corrosion, brittle cracking, deformation, sticking, or changes in hardness exceeding 20% of its original value, it should be promptly purchased and replaced from the manufacturer to ensure reliable explosion-proof performance;

　　During maintenance and disassembly, be careful not to bump, scratch, or corrode the explosion-proof surface, and regularly apply 204-1 anti rust oil;

　　The distribution box should be regularly inspected during use to ensure its good operation;

　　Non personnel are strictly prohibited from opening the cover for maintenance and inspection.

　　Other instructions for mobile explosion-proof distribution box

　　1. This product is a composite type, and the switch box adopts an explosion-proof structure. The busbar box and outlet box adopt an increased safety structure. Adopting a modular structure, various circuits can be freely selected and combined.

　　2. Equipped with a high breaking miniature circuit breaker, it has overload and short circuit protection functions.

　　3. This product has comprehensively launched a new optimized design scheme and operating mechanism, with a compact and reasonable structure, strong universality, flexible and convenient operation, and good hand feel.

　　4. All fasteners are made of corrosion-resistant 304 stainless steel fasteners.

　　three hundred and eighty

　　product structure

AfterSalesService :

• Explosion proof instrument box with display window