Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile
Category:
building materials/Geosynthetic materials/Composite geotechnical materials
Model:
400g
Brand:
Shandong Dexuda
model:
400g
purpose:
Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation
shape:
coil
manufacturer:
Shandong Dexuda Geotechnical Materials Co., Ltd
Retail Price
3.52USD
重量
kg
- Product Description
-
model 400g
purpose Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation
shape coil
manufacturer Shandong Dexuda Geotechnical Materials Co., Ltd
Description :

Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.

400g SN2 geotextile with two fabrics and one film in Guangxi.

Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.

Two cloths and one film, also known as two cloths and one film (one cloth and one film, two cloths and one film), is widely used in channel anti-seepage engineering. The extensive application and effectiveness of geosynthetic materials in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. For the application technology of geosynthetics, the country has put forward standardized technical requirements from aspects such as anti-seepage, filtration, drainage, reinforcement, and protection, greatly accelerating the promotion and application of new materials. This material has been widely used in the anti-seepage engineering of irrigation channels. Based on construction practice, this article briefly discusses the application technology of composite geomembranes. Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.
Two fabrics and one membrane are impermeable materials composed of geotextiles and geomembranes. They are mainly used for anti-seepage. Two fabrics and one membrane impermeable geotextiles are divided into one fabric and one membrane and two fabrics and one membrane, with a width of 4-6m and a weight of 200-1500g/m2. Their physical and mechanical properties, such as tensile strength, tear resistance, and bursting resistance, refer to elevation, which can meet the needs of civil engineering such as water conservancy, municipal engineering, construction, transportation, subway, and tunnel. Due to the use of polymer materials and the addition of anti-aging agents in the production process, it can be used in unconventional temperature environments. Shandong 400g impermeable geotextile with two fabrics and one membrane geotextile.

Precautions for the construction of two fabrics and one film:
1. Two fabrics and one membrane impermeable geotextile is formed by heating one or both sides of a thin film in a far-infrared oven, and pressing the geotextile and geotextile together through a guide roller to form a composite geotextile. With the improvement of production technology, there is also a casting method for making composite geomembranes. Its forms include one cloth and one film, two cloths and one film, two films and one cloth, etc. Tianjin 400g PE geotextile with two fabrics and one membrane geotextile.
2. A protective layer of impermeable geotextile with two fabrics and one membrane to prevent damage to the protective anti-seepage layer. In order to reduce the ultraviolet radiation and increase the anti-aging performance, the embedding method is adopted. Hunan 400g SN2 geotextile with two fabrics and one membrane, two fabrics and one membrane.
In the construction of two fabrics and one membrane, the first step is to use smaller diameter sand or clay to level the base surface, and then lay two fabrics and one membrane. Two cloths and one membrane impermeable geotextile should not be tightly stretched. The two ends should be buried in the soil in a corrugated shape, and then a transition layer of about 10cm should be laid on the two cloths and one membrane with fine sand or clay. Build 20-30cm stone blocks (or precast concrete blocks) as a protective layer against erosion. During construction, efforts should be made to avoid stones directly hitting the two cloth and one membrane impermeable geotextile, and protective layer construction should be carried out while laying the membrane. The connection between the two fabrics and one film and the surrounding structures should be anchored with expansion bolts and steel plate pressure strips. The connection part should be coated with emulsified asphalt (2mm thick) for bonding to prevent leakage at that location. Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.
400g PE composite geotextile with two fabrics and one film geotextile in Xinjiang.


Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.

Gansu 400g waterproof geotextile with two fabrics and one membrane geotextile.

Hebei 400g PE composite geotextile with two fabrics and one membrane geotextile.
AfterSalesService :
Key words:- Two fabrics and one film