Inner Mongolia 400g impermeable geotextile with two fabrics and one film impermeable geotextile
Inner Mongolia 400g impermeable geotextile with two fabrics and one film impermeable geotextile

Inner Mongolia 400g impermeable geotextile with two fabrics and one film impermeable geotextile

Category:

building materials/Geosynthetic materials/Composite geotechnical materials

Model:

400g

Brand:

Shandong Dexuda

model:

400g

purpose:

Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation

shape:

coil

manufacturer:

Shandong Dexuda Geotechnical Materials Co., Ltd

Retail Price

3.69USD


重量

kg

  • Product Description
  • model

    400g

    purpose

    Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation

    shape

    coil

    manufacturer

    Shandong Dexuda Geotechnical Materials Co., Ltd

    Description :

    内蒙古400克不透水土工布

      Inner Mongolia 400g impermeable geotextile with two fabrics and one membrane.

      Gansu 400g waterproof geotextile with two fabrics and one membrane geotextile.

    内蒙古400克不透水土工布

      Inner Mongolia 400g impermeable geotextile with two fabrics and one membrane.

    内蒙古400克不透水土工布

      Impermeable geotextile, also known as impermeable geotextile (one fabric, one membrane, two fabrics, one membrane), is widely used in channel anti-seepage engineering. The extensive application and effectiveness of geosynthetic materials in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. For the application technology of geosynthetics, the country has put forward standardized technical requirements from aspects such as anti-seepage, filtration, drainage, reinforcement, and protection, greatly accelerating the promotion and application of new materials. This material has been widely used in the anti-seepage engineering of irrigation channels. Based on construction practice, this article briefly discusses the application technology of composite geomembranes. Inner Mongolia 400g impermeable geotextile with two fabrics and one membrane.

      Impermeable geotextile is a composite material made of geotextile and geotextile membrane, mainly used for anti-seepage. Two fabrics and one membrane impermeable geotextile is divided into one fabric and one membrane and two fabrics and one membrane, with a width of 4-6m and a weight of 200-1500g/m2. It has high physical and mechanical performance indicators such as tensile strength, tear resistance, and roof burst resistance, and can meet the needs of civil engineering such as water conservancy, municipal engineering, construction, transportation, subway, tunnel, etc. Due to the use of polymer materials and the addition of anti-aging agents in the production process, it can be used in unconventional temperature environments. Henan 400g PE composite geotextile with two fabrics and one membrane geotextile.

      Precautions for construction of impermeable geotextile:

      1. Two fabrics and one membrane impermeable geotextile is formed by heating one or both sides of a thin film in a far-infrared oven, and pressing the geotextile and geotextile together through a guide roller to form a composite geotextile. With the improvement of production technology, there is also a casting method for making composite geomembranes. Its forms include one cloth and one film, two cloths and one film, two films and one cloth, etc. Henan 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.

      2. A protective layer of impermeable geotextile with two fabrics and one membrane to prevent damage to the protective anti-seepage layer. In order to reduce the ultraviolet radiation and increase the anti-aging performance, the embedding method is adopted. Hubei 400g waterproof geotextile with two fabrics and one membrane impermeable geotextile.

      In the construction of impermeable geotextile, the first step is to use smaller diameter sand or clay to level the base surface, and then lay the impermeable geotextile. Two layers of impermeable geotextile with one membrane should not be tightly stretched. The two ends should be buried in the soil in a corrugated shape, and then a transition layer of about 10cm should be laid on the impermeable geotextile with fine sand or clay. Build 20-30cm stone blocks (or precast concrete blocks) as a protective layer against erosion. During construction, efforts should be made to avoid stones directly hitting the two cloth and one membrane impermeable geotextile, and protective layer construction should be carried out while laying the membrane. The connection between impermeable geotextile and surrounding structures should be anchored with expansion bolts and steel plate pressure strips. The connection area should be coated with emulsified asphalt (2mm thick) for bonding to prevent leakage. Inner Mongolia 400g impermeable geotextile with two fabrics and one membrane.

      Yunnan 400g waterproof geotextile with two fabrics and one membrane geotextile.

    内蒙古400克不透水土工布

      Inner Mongolia 400g impermeable geotextile with two fabrics and one membrane.

    内蒙古400克不透水土工布

      Henan 400g PE geomembrane with two fabrics and one impermeable geotextile.

    内蒙古400克不透水土工布

      Fujian 400g PE geomembrane with two fabrics and one impermeable geotextile.

    AfterSalesService :

    Key words:
    • Impermeable geotextile