Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile
Category:
building materials/Geosynthetic materials/Composite geotechnical materials
Model:
400g
Brand:
Shandong Dexuda
model:
400g
purpose:
Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation
shape:
coil
manufacturer:
Shandong Dexuda Geotechnical Materials Co., Ltd
Retail Price
3.55USD
重量
kg
- Product Description
-
model 400g
purpose Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation
shape coil
manufacturer Shandong Dexuda Geotechnical Materials Co., Ltd
Description :

Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.

Hebei 400g composite geotextile with two fabrics and one impermeable geotextile.

Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.

PE composite geomembrane, also known as PE composite geomembrane (one fabric, one film, two fabrics, one film), is widely used in channel anti-seepage engineering. The extensive application and effectiveness of geosynthetic materials in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. For the application technology of geosynthetics, the country has put forward standardized technical requirements from aspects such as anti-seepage, filtration, drainage, reinforcement, and protection, greatly accelerating the promotion and application of new materials. This material has been widely used in the anti-seepage engineering of irrigation channels. Based on construction practice, this article briefly discusses the application technology of composite geomembranes. Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.
PE composite geomembrane is an impermeable material composed of geotextile and geomembrane. It is mainly used for anti-seepage. Two fabrics and one membrane waterproof geotextile is divided into one fabric and one membrane and two fabrics and one membrane, with a width of 4-6m and a weight of 200-1500g/m2. Its physical and mechanical properties such as tensile strength, tear resistance, and top rupture refer to elevation, which can meet the needs of civil engineering such as water conservancy, municipal engineering, construction, transportation, subway, tunnel, etc. Due to the use of polymer materials and the addition of anti-aging agents in the production process, it can be used in unconventional temperature environments. Chongqing 400g waterproof geotextile with two fabrics and one film.

Precautions for the construction of PE composite geomembrane:
1. Two fabrics and one membrane waterproof geotextile is formed by heating one or both sides of a thin film with far-infrared in an oven, and pressing the geotextile and geotextile together through a guide roller to form a composite geotextile. With the improvement of production technology, there is also a casting method for making composite geomembranes. Its forms include one cloth and one film, two cloths and one film, two films and one cloth, etc. Qinghai 400g anti-seepage geotextile with two fabrics and one membrane geotextile.
2. A protective layer of waterproof geotextile with two fabrics and one membrane to prevent damage to the anti-seepage layer. In order to reduce the ultraviolet radiation and increase the anti-aging performance, the embedding method is adopted. Shandong 400g PE composite geotextile with two fabrics and one impermeable geotextile.
In the construction of PE composite geomembrane, the first step is to use smaller diameter sand or clay to level the base surface, and then lay the PE composite geomembrane. Two fabrics and one membrane waterproof geotextile should not be tightly stretched. The two ends should be buried in the soil in a corrugated shape. Then, a layer of about 10cm transition layer should be laid on the PE composite geotextile membrane with fine sand or clay. Build 20-30cm stone blocks (or precast concrete blocks) as a protective layer against erosion. During construction, efforts should be made to avoid stones directly hitting the two cloth and one membrane waterproof geotextile, and protective layer construction should be carried out while laying the membrane. The connection between PE composite geomembrane and surrounding structures should be anchored with expansion bolts and steel plate pressure strips. The connection part should be coated with emulsified asphalt (2mm thick) for bonding to prevent leakage at that location. Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.
Yunnan 400g composite geotextile with two fabrics and one membrane geotextile.


Shanxi 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.

Shanghai 400g non-woven composite geotextile with two fabrics and one membrane waterproof geotextile.

Hainan 400g anti-seepage geotextile with two fabrics and one membrane geotextile.
AfterSalesService :
Key words:- PE composite geomembrane