Qinghai 0.3mm PE film, 0.15mm polyethylene waterproof film
Category:
printing/plastic film/Other plastic films
Model:
zero point three
Brand:
Dexuda
model:
zero point three
type:
Separation film
material:
polyethylene
hardness:
soft texture
wall thickness:
zero point three
production process:
blow molding
length:
fifty-five
width:
1200mm~2000mm
tensile properties:
4.10N/mm
Specifications:
0.3 millimeters
Place of Origin:
Ling County Development Zone, Dezhou City, Shandong Province
manufacturer:
Shandong Dexuda Geotechnical Materials Co., Ltd
Retail Price
2.28USD
重量
kg
- Product Description
-
model zero point three
type Separation film
material polyethylene
hardness soft texture
wall thickness zero point three
production process blow molding
length fifty-five
width 1200mm~2000mm
tensile properties 4.10N/mm
Specifications 0.3 millimeters
Place of Origin Ling County Development Zone, Dezhou City, Shandong Province
manufacturer Shandong Dexuda Geotechnical Materials Co., Ltd
Description :
Qinghai 0.3mm PE film, 0.15mm polyethylene waterproof film
Liaoning 0.15mm PE film&0.2mm polyethylene moisture-proof film
The 0.3mm PE film produced by our company is also known as polyethylene plastic film.
This product is also known as polyethylene isolation film, polyethylene waterproof film, polyethylene anti-seepage film, polyethylene moisture-proof film, PE isolation film, PE moisture-proof film, PE waterproof film... Qinghai 0.3mm PE film -0.15mm polyethylene waterproof film.
Polyethylene waterproof film product thickness: various thicknesses such as 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, etc,
0.3mm PE film product size: Regular size: 6m wide * 50m long (roll)
1、 0.15mm0.3mmPE film product introduction:
0.15mm polyethylene waterproof film is mainly divided into two categories: high-density polyethylene (HDPE) film and low-density polyethylene (LDPE) film. Polyethylene native resin is selected. The main component is 97.5% high-density polyethylene, about 2.5% carbon black, anti-aging agent, antioxidant, ultraviolet absorber, stabilizer and other auxiliary materials. The current automatic polyethylene waterproof film production equipment is made by three-layer co extrusion technology.
2、 Performance characteristics of 0.15mm0.3mmPE membrane:
1. Suitable viscosity: easy to stick and tear;
2. Stable peeling force: small changes over time, that is, the smaller the increase in peeling force, the better;
3. 0.15mm polyethylene waterproof film has good weather resistance: it can be used for up to six months to one year under sunlight exposure conditions;
4. Long storage period: stored in the warehouse for more than one year without any change in quality; Anhui 0.5PE film, 0.4mm thick polyethylene isolation film.
5. 0.15mm0.3mmPE film is non polluting and non corrosive: the adhesive is inert and will not undergo chemical reactions with the surface of the adhered material; Qinghai 0.3mm PE film and 0.15mm polyethylene waterproof film.
6. Mechanical properties: tensile strength, elastic modulus, elongation, etc. that meet user requirements.
3、 Application of 0.15mm polyethylene waterproof film:
0.3mm PE film, as a new type of material, has the characteristics and functions of anti-seepage, anti-corrosion performance, good chemical stability, and can be processed according to actual engineering needs. It has been widely used for anti-seepage of embankments, dams, and reservoirs in water conservancy projects. At the same time, it is also used as an isolation, anti-seepage, anti-corrosion, leak proof, and moisture-proof material in channels, reservoirs, sewage tanks, swimming pools, buildings, underground structures, garbage dumps, environmental engineering, and other fields. Jiangxi 0.6mm PE film and 0.4mm thick polyethylene film have been widely used in this technology since the 1930s, and gradually promoted the use of HDPE film in various projects since the 1980s.
Qinghai 0.3mm PE film, 0.15mm polyethylene waterproof film
AfterSalesService :
Key words:- 0.3mm PE film
