Manufacturer Guocheng supplies orange peel embossed aluminum coil 1060 patterned aluminum coil 3003 color coated aluminum coil anti-corrosion and rust prevention

Description :

　　Manufacturer Guocheng supplies orange peel embossed aluminum coil 1060 patterned aluminum coil 3003 color coated aluminum coil anti-corrosion and rust prevention

　　Customize various models of aluminum coil wrapped pipes with large quantities of insulation aluminum coils and offer discounts

　　The company's main products include imported aluminum materials, produced aluminum materials, aluminum coils, insulation aluminum coils, orange peel aluminum coils, aluminum plates, aluminum rods, aluminum tubes, aluminum strips, and specifications.

　　The main products are aluminum alloy plates such as 1 series, 2 series, 3 series, 5 series, 6 series, and 7 series.

　　1. Aluminum coil processing technology

　　Silicon has a corrosive effect on hard alloys. It is recommended to use diamond cutting tools, but this is not the case as the increasing silicon content also increases the destructive power of the tools. Therefore, some manufacturers recommend using diamond cutting tools when the silicon content exceeds 8%.

　　Aluminum alloys with silicon content between 8% -12% are a transition zone, which can be used with both ordinary hard alloys and diamond cutting tools. However, when using hard alloys, tools that have undergone PVD (Physical Coating) method, do not contain aluminum elements, and have a smaller film thickness should be used. Due to the PVD method and small film thickness, it is possible for the cutting tool to maintain a sharp cutting edge (otherwise, sufficient passivation of the cutting edge is required to avoid abnormal growth of the film layer at the cutting edge, and cutting aluminum alloys will not be sharp enough), and the aluminum content in the film layer material may cause the blade film layer to have an affinity with the workpiece material, thereby damaging the bond between the film layer and the tool substrate.

　　Characteristics of Aluminum Coil

　　The strength of aluminum coil is about 10% higher than 1100, and its formability, solubility, and corrosion resistance are all good. Generally used for objects, heat sinks, cosmetic boards, copier rollers, and ship materials, it is a widely used rust proof aluminum. This alloy has low strength (slightly higher than industrial pure aluminum) and cannot be strengthened by heat treatment. Therefore, cold working methods are used to improve its mechanical properties: it has high plasticity in the annealed state, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, and poor machinability.

　　2. Main uses of insulated aluminum coils: Alloy aluminum coils are mainly used for low load parts that require high plasticity and good weldability, and work in liquid or gas media, such as oil tanks, gasoline or lubricant conduits, various liquid containers, and other low load parts made by deep drawing.

　　Rich in color and strong in decoration: The color coated aluminum coil has a realistic physical texture and a vivid natural beauty. Groups can be made freely, providing customers with more personalized choices and more enjoyment of beauty.

　　4. Strong weather resistance and color stability: The painted patterns formed by joining color coated aluminum coils and high-temperature baking have high gloss retention, good color stability, and minimal color difference changes. Polyester paint newspaper has a shelf life of 10 years, while fluorocarbon paint has a shelf life of over 20 years.

　　5 processes, high bending resistance: The color coated aluminum coil is made of aluminum, plastic, and adhesive, with a composite process. Under the climate conditions of all seasons, changes in wind pressure, temperature, humidity, and other factors will not cause bending, deformation, expansion, etc. Aluminum coils are widely used in aluminum-plastic panels, aluminum veneers, aluminum honeycomb panels, aluminum ceilings, roof surfaces, corner materials, cans, and electronic products. Its performance is very stable and not easily corroded. After surface treatment, it can achieve a 30-year quality guarantee. The weight per unit volume is the lightest among metal materials. Color coated aluminum is currently a popular new type of material.

　　Summary of Quality Inspection of Aluminum Coil

　　The quality control of raw materials is related to the life of products. We strictly control the entrance and quality of products from the source. For all purchased raw materials, we first implement an inspection system according to regulations. The inspector confirms the quality certification documents submitted by the supplier and conducts inspections from aspects such as appearance and size. If necessary, we also conduct mechanical performance tests. Improve inspection transparency, conduct product inspections as soon as possible based on the size of the inspection quantity, and issue inspection reports in a timely manner.

AfterSalesService :

• Orange peel embossed aluminum coil