Yuexiang Security Electric Heat Tracing Composite Eye Wash 304 Stainless Steel Explosion proof Electric Heat Tracing Eye Wash

Description :

　　 1、 Steps:

　　 1. Introduction to electric heat tracing eye wash and shower equipment,

　　Eye washers and showers are used in emergency situations when harmful substances (such as acidic, alkaline, organic compounds, and other toxic and corrosive chemicals) splash onto the body, eyes, and face of individuals. They are temporarily used to slow down the further harm of harmful substances to the human body, and further treatment and treatment should follow the guidance of a doctor.

　　2. Instructions for using an eye wash:

　　Open the dust cover and rinse your eyes or face to dilute.

　　3. The usage method of shower,

　　Pull down the shower hand pull valve by hand, and water will automatically spray out from the sprinkler head. After use, reset the valve rod and close the shower hand pull valve.

　　4. Maintenance of eye wash stations

　　Wipe the exterior of the eye wash

　　Check once a week and eliminate rust water left in the system,

　　When the outdoor temperature drops below 0 ℃, the on/off switch of the electric heat tracing temperature control box must be turned on to ensure that the water does not freeze during use.

　　Regularly clean the filter to ensure the cleanliness of the eye wash water,

　　The inspection includes:; The indicator mark of the eye washer is intact, the appearance is intact, there is no rust, the valve switch is effective, the main valve is in a normally open state, the filter screen of the eye washer nozzle is not blocked, the water outlet is normal, the water source is clear, the protective cover of the eye washer nozzle is intact, and the filter screen is not corroded or blocked.

　　Fill out inspection records and place them on site.

　　2、 Photo taken:

AfterSalesService :

• Yuexiang Security