Factory direct sales of sewage treatment defoamers, low price, low performance of industrial sewage defoamers
Category:
fine chemicals /surface active agent /Foaming defoamer
Model:
SH-Z
Brand:
all corners of the world
brand:
all corners of the world
model:
SH-Z
Product Name:
silicone defoamer
main ingredients:
Silicon based
category:
Industrial grade defoamer
main purpose:
Suitable for defoaming and foam suppression in sewage treatment systems.
appearance:
Semi liquidity
solid content:
10-99
Operating temperature:
0-110
flash point:
0
specific gravity:
one point zero nine
Recommended dosage:
One thousandth to three thousandths
Product storage and transportation:
Storage below 35 degrees Celsius
Packing Specification:
20/200
Place of Origin:
Zaoyang, Hubei
Retail Price
Negotiable
重量
kg
- Product Description
-
brand all corners of the world
model SH-Z
Product Name silicone defoamer
main ingredients Silicon based
category Industrial grade defoamer
main purpose Suitable for defoaming and foam suppression in sewage treatment systems.
appearance Semi liquidity
solid content 10-99
Operating temperature 0-110
flash point 0
specific gravity one point zero nine
Recommended dosage One thousandth to three thousandths
Product storage and transportation Storage below 35 degrees Celsius
Packing Specification 20/200
Place of Origin Zaoyang, Hubei
Description :
Industrial wastewater treatment defoamer SH-Z120
1、 The main components of defoamers for industrial wastewater treatment are modified polydimethylsiloxane and emulsifier dispersants
2、 Technical indicators for defoamers used in industrial wastewater treatment
Appearance: Milky white or light yellow viscous liquid
Viscosity: 100-2000csPH value: 6-9
Effective ingredients: 15% to 50%
3、 The application scope and characteristics of defoamers for industrial wastewater treatment. This product is suitable for defoaming aqueous systems in industries such as chemical, wastewater treatment, metal cleaning, petroleum drilling mud, carpet cleaning, agricultural glyphosate water agent, wood paint water-based coatings, etc. It has the characteristics of fast defoaming speed, long defoaming time, non-toxic and odorless, and will not cause secondary pollution.
4、 Instructions for using defoamers for industrial wastewater treatment: Dilute this product with clean water or foaming solution to a uniform solution, and then add it to the foaming solution. It can also be added directly. The amount of addition will be determined by the customer based on specific experimental conditions. Diluted defoamers should be used up as soon as possible and should generally not be stored for more than 12 hours.
5、 Packaging and storage of defoamers for industrial wastewater treatment
⑴ Use 50kg polyethylene drums or 200kg plastic coated iron drums, or change the packaging according to user requirements.
⑵ This product should be stored in a well ventilated and dry place, protected from rain and direct sunlight. It should not be mixed, transported, or stacked with strong acids, alkalis, or toxic substances.
⑶ Under the above conditions, this product has a storage period of 6 months from the date of production. If there is a small amount of layering phenomenon after exceeding the storage period, it can continue to be used after being mixed evenly and tested as qualified, without affecting its effectiveness.
⑷ This product is transported as non dangerous goods.
AfterSalesService :
Key words:- Sewage treatment defoamer
More Products
