Supply water-based latex paint with low dosage of defoamer
Category:
fine chemicals /Coating Additives/Paint defoamer
Model:
T10A
Brand:
Hubei New Four Seas
model:
T10A
Product Name:
silicone defoamer
main ingredients:
Silicon based
Effective substance content:
20-50
main purpose:
Water based coatings, defoamers for oil-based inks
appearance:
Colorless to pale yellow liquid
PH value:
7-8
Recommended dosage:
1-5g/kg
Retail Price
Negotiable
重量
kg
- Product Description
-
model T10A
Product Name silicone defoamer
main ingredients Silicon based
Effective substance content 20-50
main purpose Water based coatings, defoamers for oil-based inks
appearance Colorless to pale yellow liquid
PH value 7-8
Recommended dosage 1-5g/kg
Description :
Supply water-based latex paint with low dosage of defoamer
1、 Characteristics
Composed of mineral oil, fatty acid metal soap, and dispersant;
Low impact on coating and high efficiency;
Especially suitable for water-based latex paint systems with medium viscosity and PVC in the range of 10-60%;
The effect is stable during the storage period.
Viscosity is less affected by temperature changes.
2、 Typical product data
indicator
Physicochemical properties
test method
appearance
Light yellow to yellow oily liquid
visual estimation
PH value
5.0~7.0
Precision pH test paper
Viscosity (25 ℃)
80~180mPa·s
GB/T 5561-
NDJ-79 Mechanical Viscometer
dispersion
Can suspend and disperse in water
1% aqueous solution
Specific gravity (g/ml)
0.8~1.0
GB/T 611-2006
Note: The above data is for reference only and should not be used as technical indicators.
3、 Application Fields
Water based building coatings including high, medium, and low PVC;
Water based coatings and inks;
Water-based adhesive;
Other polymer systems that cannot use organosilicon.
4、 How to use
T-10A defoamer is composed of multiple substances, and layering or slight precipitation may occur during storage, which is a normal phenomenon. It is recommended that users stir slightly before use to avoid affecting the effectiveness of the product.
T-10A defoamer cannot be diluted with water and can be directly added to the foaming system. If diluted with water, it may cause stratification, reduce the effectiveness of defoaming, and ultimately increase the cost of use. Our company is not responsible for this.
Due to its strong anti foaming properties, this product can be added as an anti foaming component to the product. The recommended addition amount is 0.1~0.5% of the total formula amount, which can also be added in stages. 40% of the mass is added in the grinding stage, and the remaining 60% is added in the paint mixing stage (before adding lotion). The dosage is determined by the user through on-site testing.
5、 Packaging and Storage
This product is packaged in 25L or 200L plastic drums, or customized according to customer requirements. Please store at 5-35 ℃ and avoid direct heating. If there is a fire, extinguish it using general petroleum product methods.
At a temperature of 10-30 ℃, the shelf life of unopened packaging is 6 months from the date of production.
AfterSalesService :
Key words:- Supply water-based latex paint defoamer
More Products
