Supply water-based ink defoamer, mineral oil defoamer, fast defoamer
Category:
fine chemicals /surface active agent /Foaming defoamer
Model:
SH-Y105
Brand:
all corners of the world
brand:
all corners of the world
model:
SH-Y105
Product Name:
Polydimethylsiloxane
main ingredients:
Polyether modified silicon
category:
industrial-grade
main purpose:
Fast defoaming speed, long foam suppression time, high efficiency, low dosage, and non-toxic, non corrosive, and non adverse effects
appearance:
liquidity
solid content:
fifty
Operating temperature:
thirty-five
flash point:
0
specific gravity:
one point zero five
Recommended dosage:
One ten thousandth to five ten thousandth
Product storage and transportation:
Storage below 35 degrees Celsius
Packing Specification:
25/200
Place of Origin:
Zaoyang, Hubei
Retail Price
Negotiable
重量
kg
- Product Description
-
brand all corners of the world
model SH-Y105
Product Name Polydimethylsiloxane
main ingredients Polyether modified silicon
category industrial-grade
main purpose Fast defoaming speed, long foam suppression time, high efficiency, low dosage, and non-toxic, non corrosive, and non adverse effects
appearance liquidity
solid content fifty
Operating temperature thirty-five
flash point 0
specific gravity one point zero five
Recommended dosage One ten thousandth to five ten thousandth
Product storage and transportation Storage below 35 degrees Celsius
Packing Specification 25/200
Place of Origin Zaoyang, Hubei
Description :
Water based ink defoamer is designed for flexographic/gravure water-based ink, and is effective in eliminating pure acrylic, styrene acrylic resin, maleic acid resin, and acrylic The foam produced by water-based ink of dilute acid resin lotion, rosin resin, isopropyl acetate, glue and other binders has a special effect, especially for micro foam. It has the advantages of low dosage, long foam inhibition time, good water dispersion and so on. This product has good compatibility with water-based ink and will not affect film-forming properties or cause problems such as shrinkage and fisheye.
1. Strong defoaming and anti foaming ability, with minimal dosage, does not affect the basic properties of the foaming system.
2. Good heat resistance, chemical stability, no corrosion, non-toxic, no adverse effects, non flammable, non explosive.
3. Its performance is comparable to imported products, and its price has a more obvious advantage.
Water based ink defoamer is used for defoaming and inhibiting of water-based ink, printing ink, synthesis of various lotion, rubber industrial polymerization, condensation degassing process, polymer glue, benzene Bing lotion, lotion polymerization, etc. It is added in the high-speed dispersion and grinding stage to inhibit the generation of bubbles, and another part is added in the other stage to eliminate foam. The increase in quantity during these two stages depends on the situation. The recommended dosage is 0.1-0.8% of the ink. Please test the usage amount.
1、 Main components of Zhejiang water-based ink defoamer
Polyether modified polysiloxane, emulsifier dispersant, purified water
2、 Technical indicators of Zhejiang water-based ink defoamer
Appearance: Milky white viscous liquid
Viscosity: 20-200cs
PH value: 6-8
Active ingredients: 8% to 20%
Water solubility: self emulsifying
3、 Application scope and characteristics of Zhejiang water-based ink defoamer
This product is self emulsifying and does not produce needle holes, spots, or fish eyes in water-based coatings. It also has fast defoaming speed and good compatibility.
AfterSalesService :
Key words:- Water based ink defoamer
More Products
