Selling water treatment defoamers to support exports

Description :

　　With the rapid development of economy, our living environment is constantly changing. Water resources are one of the important resources on which we rely for survival. However, sewage is always produced in life and industrial development, especially in industrial production. All discharged sewage must be subject to purification treatment, but in the process of sewage treatment, there will be a lot of foam, and foam will have an impact on the sewage treatment process. Only by adding water treatment defoamer to remove the foam in the sewage, can we meet the national standards, discharge standards, and minimize environmental pollution. In response to these situations, our company has developed sewage defoamers, polyether modified silicone defoamers, and polyether defoamers, which have the characteristics of fast defoaming speed, low dosage, and low cost.

　　Wastewater Treatment Defoamer Z-25A Defoamer Product Manual

　　1、 Basic characteristics

　　Composed of polydimethylsiloxane, anionic/nonionic emulsifiers, dispersants, and water;

　　? It has good ability to inhibit foam under high temperature and strong alkaline conditions;

　　2、 Typical data

　　indicator

　　Physicochemical properties

　　test method

　　Appearance: Milky white to slightly yellow, uniform liquid. Visual inspection

　　PH value 6.0~9.0 precision pH test paper

　　Viscosity (25 ℃) 80~1000mPa · s GB/T 5561-1994

　　Dispersibility can suspend and disperse 1% aqueous solution in water

　　Note: The above data is for reference only and should not be used as technical indicators;

　　Selling water treatment defoamers to support exports

　　3、 Application Fields

　　Papermaking and pulping;

　　In metal cleaning agents, textile processing, washing, and fabric dyeing;

　　4、 How to use

　　Z-25A defoamer is composed of multiple substances, and there may be layering or slight precipitation during storage,

　　This is a normal phenomenon. It is recommended that users stir slightly before use to avoid affecting the effectiveness of the product.

　　Z-25A defoamer can be directly added to the foaming system. It can also be diluted with a certain amount of thickening water

　　After use;

　　5、 Packaging and Storage

　　This product is packaged in 25L or 200L plastic drums, or customized according to customer requirements. Please operate at 5-35 ℃

　　Store under conditions and avoid direct heating. If there is a fire, extinguish it using general petroleum product methods.

　　At a temperature of 10-30 ℃, the shelf life of unopened packaging is 6 months from the date of production.

　　Introduction to defoamer products for leachate from garbage

　　Basic characteristics

　　Composed of liquid hydrocarbons and dispersants;

　　Does not contain silicone oil, mineral oil, wax, etc;

　　2、 Typical data

　　3、 Application Fields

　　Suitable for sewage treatment and landfill leachate;

　　Building materials industry defoaming, water reducing agent defoaming;

　　4、 How to use

　　SH_237_7 can be directly added to landfill leachate to eliminate foam, or it can be diluted with water or foaming liquid to form a uniform solution and then added to the foaming liquid. After dilution, it should be used up as soon as possible.

　　5、 Packaging and Storage

　　This product is packaged in 25L or 200L plastic drums, or customized according to customer requirements. Please store at 5-35 ℃ and avoid direct heating. If there is a fire, extinguish it using general petroleum product methods.

　　Under the condition of unopened packaging at a temperature of 10-30 ℃, the shelf life is 12 months from the date of production.

AfterSalesService :

• Sewage defoamer