Anhui Wholesale High Temperature Coating Silicone Resin Manufacturer

Description :

　　Anhui Wholesale High Temperature Coating Silicone Resin Manufacturer

　　For water-based silicone lotion, the recommended formula shown in the following table can be used as the starting formula to prepare one component baking paint:

　　Low speed shear mixing components 1-6;

　　Add components 7-9 in sequence, mix with low-speed shear, and grind at high speed (such as sand grinding with a linear velocity of 7.0m/s); Under low-speed shear, gradually add silicone resin lotion, and successively add thickening agent to adjust to the construction viscosity; Leveling agents can be added as needed;

　　Waterborne paint silicone resin, it is not recommended to grind the color paste directly with the silicone resin lotion; If it needs to be mixed with other organic resins for use, the organic resin can be used for color paste grinding according to the actual situation, and then mixed into the organic silicone resin lotion; Before use, it is necessary to test the compatibility, especially whether the pH value matches. The silicone resin lotion is generally neutral, and the pH value can be adjusted with 5% potassium hydroxide solution or 5% acetic acid solution as required.

　　Recommended drying conditions and typical characteristics of water-based silicone lotion:

　　Dry at room temperature for ≥ 45 minutes, at 230 ℃ for 1.0 hour, at 250 ℃ for 30 minutes, or at 280 ℃ for 15 minutes

　　SH-9611 high-temperature self drying silicone resin

　　1、 Performance and Application

　　This resin is polymerized using a special process from methyl, phenylchlorosilane, and special silane monomers. It has the characteristics of high temperature resistance and superior self drying performance. When combined with different pigments and functional materials, it can produce various heat-resistant paints for exhaust pipes, electrostatic precipitators, furnaces, etc. This resin can be combined with various organic resins such as alkyd, acrylic, polyester, epoxy, etc. to prepare various heat-resistant coatings for different purposes and improve resin performance.

　　Anhui Wholesale High Temperature Coating Silicone Resin Manufacturer

　　Waterborne silicone resin lotion

　　1、 Performance and Application

　　It is a non-ionic, methyl phenyl silicone resin lotion, widely used in heat resistant industrial coatings, with typical characteristics including:

　　1. High temperature resistance, with clear varnish up to 350 ℃ and colored paint up to 650-700 ℃;

　　2. It has excellent compatibility with organic resins and can be compounded with organic resins such as acrylic, polyester, epoxy, etc., achieving a combination of high decorative properties of organic resins and heat resistance of silicone resins;

　　3. Good film-forming and air drying properties, can be used alone/in combination as heat-resistant gloss varnish;

　　4. Can be infinitely diluted with water, in compliance with environmental regulations;

　　.

　　Hubei Xinsihai Chemical Co., Ltd. produces: pure methyl silicone resin, pure benzene based silicone resin, epoxy modified silicone resin, acrylic modified silicone resin, high-temperature resistant coating resin, aviation coating resin, 600 degree anti-corrosion paint resin, paint resin, colored high-temperature lacquer resin, three proof paint resin, composite material resin, magnetic powder bonding resin, metal powder moisture-proof resin, ceramic bright anti fouling resin, marble polishing resin, silicone waterproof resin, water outlet sliding plate resin, refractory material resin, high-temperature casting resin, exhaust pipe paint resin, chimney paint resin, transformer coil resin, H-grade motor resin, H-grade glass fiber immersion resin, steel anti-corrosion paint resin, barbecue oven paint resin, high-temperature insulation coating resin, heat-resistant coating resin, high-temperature PET adhesive, high-temperature PI adhesive, green tape adhesive, high-temperature label adhesive, polyimide tape adhesive, gold finger tape special adhesive, aluminum foil adhesive, stainless steel adhesive, Dow Corning 7268 adhesive, PET protective film adhesive, fire-resistant mica tape adhesive, flame-retardant cable mica tape adhesive, synthetic mica tape adhesive, mica heating plate adhesive, electric heating film adhesive, mica heating plate adhesive, high hardness mica plate adhesive, soft mica plate adhesive, plastic mica plate adhesive, low smoke mica tape fire-resistant adhesive, cable insulation tape adhesive, special mica tape adhesive, etc.

　　Main technical indexes of water-based silicone resin lotion 9608-1

　　Recommended application of water-based silicone resin lotion 9608-1

　　1. Wide range of industrial heat-resistant applications, such as boilers, heat source pipelines, electric heaters, and combustion furnaces;

　　2. Widely applicable to heat-resistant cooking equipment such as ovens and ovens;

　　Packaging, storage and transportation of water-based silicone resin lotion 9608-1

　　1. The packaging form is generally 200kg and 50kg plastic drums;

　　2. It is recommended to store under sealed conditions at 5-36 ℃ in a cool and dry environment. The corresponding shelf life is generally 12 months from the date of production;

　　Construction reference of water-based silicone resin lotion 9608-1

　　1. It is recommended to prepare water-based resin free color paste and use it together with resin lotion;

　　When using composite organic resins together, it is necessary to screen their compatibility, especially in varnish applications;

　　3. The resin lotion has good room temperature self drying property, which can give the workpiece initial protection and transportability; But if you want to achieve better heat resistance and physical and mechanical properties, it is recommended to fully cure at 200-280 ℃ for 15-60 minutes, preferably at 250 ℃ for 30 minutes or at 280 ℃ for 15 minutes;

AfterSalesService :

• Waterborne silicone lotion