Supply PVA polyether defoamer with good hydrophilicity and fast defoaming
Category:
fine chemicals /surface active agent /Foaming defoamer
Model:
SH-GD
Brand:
all corners of the world
brand:
all corners of the world
model:
SH-GD
Product Name:
Enzyme based fermentation defoamer
main ingredients:
Polyether modified silicon
category:
GB2760-2014
main purpose:
Enzyme preparation fermentation, production of defoamers during fermentation
appearance:
Semi liquidity
solid content:
10-55
Operating temperature:
0-130
flash point:
0
specific gravity:
one point zero two
Recommended dosage:
One thousandth to three thousandths
Product storage and transportation:
Storage below 35 degrees Celsius
Packing Specification:
20/200
Place of Origin:
Xiangyang, Hubei
manufacturer:
Hubei Longsheng Sihai
Retail Price
25.00USD
重量
kg
- Product Description
-
brand all corners of the world
model SH-GD
Product Name Enzyme based fermentation defoamer
main ingredients Polyether modified silicon
category GB2760-2014
main purpose Enzyme preparation fermentation, production of defoamers during fermentation
appearance Semi liquidity
solid content 10-55
Operating temperature 0-130
flash point 0
specific gravity one point zero two
Recommended dosage One thousandth to three thousandths
Product storage and transportation Storage below 35 degrees Celsius
Packing Specification 20/200
Place of Origin Xiangyang, Hubei
manufacturer Hubei Longsheng Sihai
Description :
Supply PVA polyether defoamer with good hydrophilicity and fast defoaming
Appearance: Colored viscous liquid
Viscosity: 100-2000cs
PH value: 6-9
Effective ingredients: 15% to 30%
3、 Scope and characteristics of use: Polyether defoamer for PVA with good hydrophilicity and fast defoaming
This product is suitable for aqueous phase in industries such as chemical, sewage treatment, metal cleaning, and petroleum drilling mud
The system has the characteristics of fast defoaming speed, long foam suppression time, non-toxic and odorless, and will not cause secondary pollution.
4、 Usage: Polyether defoamer for PVA with good hydrophilicity and fast defoaming
Dilute this product with water or foaming solution to a uniform solution before adding it to the foaming solution, or it can be added directly.
The amount of addition will be determined by the customer based on specific experimental conditions. Diluted defoamers should be used up as soon as possible and should generally not be stored for more than 12 hours.
5、 Packaging and storage supply of PVA polyether defoamer with good hydrophilicity and fast defoaming
⑴ Use 50kg polyethylene drums or 200kg plastic coated iron drums, or change the packaging according to user requirements.
⑵ This product should be stored in a well ventilated and dry place, protected from rain and direct sunlight. It should not be mixed, transported, or stacked with strong acids, alkalis, or toxic substances.
⑶ Under the above conditions, this product has a storage period of 6 months from the date of production. If there is a small amount of layering phenomenon after exceeding the storage period, it can continue to be used after being mixed evenly and tested as qualified, without affecting its effectiveness.
⑷ This product is transported as non dangerous goods.
AfterSalesService :
Key words:- Polyether defoamer for PVA
More Products
