485 signal lightning arrester, fire protection circuit surge control signal, PLC lightning protection module surge protector
Category:
mechanical equipment/High voltage electrical appliances/Lightning protection and lightning protection products
Model:
AS24Y-D/4
Brand:
Anxin Lightning Protection
model:
AS24Y-D/4
type:
Varistor/gas discharge combination lightning arrester
voltage level:
low pressure
Protective nature:
Open circuit lightning arrester
Installation type:
series connection
Processing & Customization:
yes
Maximum operating voltage:
twenty-four
rated voltage:
twenty-four
Rated discharge current:
5K
Maximum discharge current:
10K
Protection level:
Level 2
response time:
zero point zero zero zero zero zero one
Product Certification:
Type test report that meets national standards
Place of Origin:
Shenzhen
manufacturer:
Guangdong Anxin Lightning Protection Technology Co., Ltd
Retail Price
880.00USD
重量
kg
- Product Description
-
model AS24Y-D/4
type Varistor/gas discharge combination lightning arrester
voltage level low pressure
Protective nature Open circuit lightning arrester
Installation type series connection
Processing & Customization yes
Maximum operating voltage twenty-four
rated voltage twenty-four
Rated discharge current 5K
Maximum discharge current 10K
Protection level Level 2
response time zero point zero zero zero zero zero one
Product Certification Type test report that meets national standards
Place of Origin Shenzhen
manufacturer Guangdong Anxin Lightning Protection Technology Co., Ltd
Description :
Installation wiring:
·The lightning arrester is installed on a 35mm standard guide rail;
·The wiring method of lightning arrester is series connection; Two PE terminals can be grounded at either end of the lightning arrester;
·The output terminal (OUT) of the lightning arrester should be connected to the protected equipment as close as possible, and should not be connected in reverse;
·During installation, the two ends of the circuit must be laid separately and cannot be tied together to prevent secondary induction;
·Connect the grounding wire of the lightning arrester to the grounding bar of the lightning protection system reliably, and make sure that the grounding wire is short, thick, and straight to shorten the lightning current path as much as possible;
Detailed parameters:
AfterSalesService :
Key words:- 485 signal lightning arrester
More Products
