Industrial grade organic amine desulfurizer manufacturer

Description :

　　1. Before adding desulfurizer, check and verify the filling scale again.

　　2. The stainless steel wire mesh laid at the lower part of the desulfurization tower bed is~layer, and the mesh aperture should be smaller than the particle size of the desulfurizer. The stainless steel wire mesh is tied to the grille, and the edge of the wire mesh should be flipped up to a height of not less than mm.

　　3. According to the relevant loading items and loading quantities, load in sequence: ceramic balls, desulfurizer, ceramic balls.

　　4. Filling of ceramic balls: First, use a crane to lift the ceramic balls onto the upper platform of the desulfurization tank, then load them into the filling bucket. Use an electric hoist to place the filling bucket inside the desulfurization tank, at a distance from the bottom At around. m, open the discharge port of the loading bucket, and the ceramic ball will be unloaded to the bottom of the reactor. According to the scale of the loading chart, load it to the designated height, and then level it with a rake and record the loading height. Next, load the desulfurizer.

　　5. When loading desulfurizer, it is necessary to rake it flat at any time.

　　6. When loading to the thermocouple position (if there are thermocouples in the equipment cylinder), the loading should be stopped, and the equipment should be loaded again after the thermocouples are installed.

　　7. After installation, cover the ceramic balls on top of the desulfurizer according to the expected height and ceramic ball specifications.

　　8. The upper part of the ceramic ball is laminated with stainless steel wire mesh, and the mesh aperture should be smaller than the particle size of the desulfurizer. Then press the grille, tie the stainless steel wire mesh onto the grille, and secure the grille in place.

　　9. Timely organize and verify the loading amount of desulfurizer and ceramic balls.

　　The process of adding desulfurizer is like this, and users must strictly follow it when filling. During loading, operators must carefully carry out each step of the operation to prevent carelessness from affecting the effectiveness of the use.

AfterSalesService :

• Organic amine desulfurizer